Gecko [ www.foryou-vip.com ]

Name	Size	Permission	Date
audiodata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
capath	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
cjkencodings	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
crashers	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
data	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
decimaltestdata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
dtracedata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
encoded_modules	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
imghdrdata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
leakers	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
libregrtest	[ DIR ]	drwxr-xr-x	2025-06-04 09:21
sndhdrdata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
subprocessdata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
support	[ DIR ]	drwxr-xr-x	2025-06-04 09:21
test_asyncio	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_capi	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_email	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_import	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_importlib	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_json	[ DIR ]	drwxr-xr-x	2025-06-04 09:21
test_peg_generator	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_tools	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_warnings	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
test_zoneinfo	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
tracedmodules	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
typinganndata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
xmltestdata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
ziptestdata	[ DIR ]	drwxr-xr-x	2024-03-19 22:46
Sine-1000Hz-300ms.aif	60.25 KB	-rw-r--r--	2024-03-19 22:46
__init__.py	47 B	-rw-r--r--	2024-03-19 22:46
__main__.py	41 B	-rw-r--r--	2024-03-19 22:46
_test_atexit.py	3.61 KB	-rw-r--r--	2024-03-19 22:46
_test_eintr.py	17.65 KB	-rw-r--r--	2024-03-19 22:46
_test_embed_set_config.py	8.55 KB	-rw-r--r--	2024-03-19 22:46
_test_multiprocessing.py	193.64 KB	-rw-r--r--	2024-03-19 22:46
_typed_dict_helper.py	494 B	-rw-r--r--	2024-03-19 22:46
allsans.pem	9.87 KB	-rw-r--r--	2024-03-19 22:46
ann_module.py	1.09 KB	-rw-r--r--	2024-03-19 22:46
ann_module2.py	519 B	-rw-r--r--	2024-03-19 22:46
ann_module3.py	448 B	-rw-r--r--	2024-03-19 22:46
ann_module4.py	81 B	-rw-r--r--	2024-03-19 22:46
ann_module5.py	202 B	-rw-r--r--	2024-03-19 22:46
ann_module6.py	138 B	-rw-r--r--	2024-03-19 22:46
ann_module7.py	295 B	-rw-r--r--	2024-03-19 22:46
audiotest.au	27.48 KB	-rw-r--r--	2024-03-19 22:46
audiotests.py	12.13 KB	-rw-r--r--	2024-03-19 22:46
audit-tests.py	11.35 KB	-rw-r--r--	2024-03-19 22:46
autotest.py	209 B	-rw-r--r--	2024-03-19 22:46
bad_coding.py	24 B	-rw-r--r--	2024-03-19 22:46
bad_coding2.py	30 B	-rw-r--r--	2024-03-19 22:46
bad_getattr.py	61 B	-rw-r--r--	2024-03-19 22:46
bad_getattr2.py	77 B	-rw-r--r--	2024-03-19 22:46
bad_getattr3.py	139 B	-rw-r--r--	2024-03-19 22:46
badcert.pem	1.88 KB	-rw-r--r--	2024-03-19 22:46
badkey.pem	2.11 KB	-rw-r--r--	2024-03-19 22:46
badsyntax_3131.py	32 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future10.py	95 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future3.py	172 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future4.py	153 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future5.py	184 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future6.py	161 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future7.py	196 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future8.py	122 B	-rw-r--r--	2024-03-19 22:46
badsyntax_future9.py	142 B	-rw-r--r--	2024-03-19 22:46
badsyntax_pep3120.py	14 B	-rw-r--r--	2024-03-19 22:46
bisect_cmd.py	5.21 KB	-rwxr-xr-x	2024-03-19 22:46
cfgparser.1	67 B	-rw-r--r--	2024-03-19 22:46
cfgparser.2	19.02 KB	-rw-r--r--	2024-03-19 22:46
cfgparser.3	1.55 KB	-rw-r--r--	2024-03-19 22:46
clinic.test	94.05 KB	-rw-r--r--	2024-03-19 22:46
cmath_testcases.txt	141.05 KB	-rw-r--r--	2024-03-19 22:46
coding20731.py	22 B	-rw-r--r--	2024-03-19 22:46
curses_tests.py	1.21 KB	-rwxr-xr-x	2024-03-19 22:46
dataclass_module_1.py	837 B	-rw-r--r--	2024-03-19 22:46
dataclass_module_1_str.py	835 B	-rw-r--r--	2024-03-19 22:46
dataclass_module_2.py	756 B	-rw-r--r--	2024-03-19 22:46
dataclass_module_2_str.py	754 B	-rw-r--r--	2024-03-19 22:46
dataclass_textanno.py	126 B	-rw-r--r--	2024-03-19 22:46
datetimetester.py	245.16 KB	-rw-r--r--	2024-03-19 22:46
dis_module.py	76 B	-rw-r--r--	2024-03-19 22:46
doctest_aliases.py	240 B	-rw-r--r--	2024-03-19 22:46
doctest_lineno.py	914 B	-rw-r--r--	2024-03-19 22:46
double_const.py	1.18 KB	-rw-r--r--	2024-03-19 22:46
empty.vbs	70 B	-rw-r--r--	2024-03-19 22:46
exception_hierarchy.txt	1.81 KB	-rw-r--r--	2024-03-19 22:46
ffdh3072.pem	2.16 KB	-rw-r--r--	2024-03-19 22:46
final_a.py	411 B	-rw-r--r--	2024-03-19 22:46
final_b.py	411 B	-rw-r--r--	2024-03-19 22:46
floating_points.txt	15.92 KB	-rw-r--r--	2024-03-19 22:46
fork_wait.py	2.23 KB	-rw-r--r--	2024-03-19 22:46
formatfloat_testcases.txt	7.45 KB	-rw-r--r--	2024-03-19 22:46
future_test1.py	229 B	-rw-r--r--	2024-03-19 22:46
future_test2.py	149 B	-rw-r--r--	2024-03-19 22:46
gdb_sample.py	153 B	-rw-r--r--	2024-03-19 22:46
good_getattr.py	198 B	-rw-r--r--	2024-03-19 22:46
idnsans.pem	9.71 KB	-rw-r--r--	2024-03-19 22:46
ieee754.txt	3.21 KB	-rw-r--r--	2024-03-19 22:46
imp_dummy.py	63 B	-rw-r--r--	2024-03-19 22:46
inspect_fodder.py	1.88 KB	-rw-r--r--	2024-03-19 22:46
inspect_fodder2.py	3.69 KB	-rw-r--r--	2024-03-19 22:46
inspect_stock_annotations.py	509 B	-rw-r--r--	2024-03-19 22:46
inspect_stringized_annotations.py	612 B	-rw-r--r--	2024-03-19 22:46
inspect_stringized_annotations_2.py	60 B	-rw-r--r--	2024-03-19 22:46
keycert.passwd.pem	4.13 KB	-rw-r--r--	2024-03-19 22:46
keycert.pem	3.96 KB	-rw-r--r--	2024-03-19 22:46
keycert2.pem	3.98 KB	-rw-r--r--	2024-03-19 22:46
keycert3.pem	9.23 KB	-rw-r--r--	2024-03-19 22:46
keycert4.pem	9.24 KB	-rw-r--r--	2024-03-19 22:46
keycertecc.pem	5.5 KB	-rw-r--r--	2024-03-19 22:46
list_tests.py	16.65 KB	-rw-r--r--	2024-03-19 22:46
lock_tests.py	30.15 KB	-rw-r--r--	2024-03-19 22:46
mailcap.txt	1.24 KB	-rw-r--r--	2024-03-19 22:46
make_ssl_certs.py	9.25 KB	-rw-r--r--	2024-03-19 22:46
mapping_tests.py	21.83 KB	-rw-r--r--	2024-03-19 22:46
math_testcases.txt	23.19 KB	-rw-r--r--	2024-03-19 22:46
memory_watchdog.py	859 B	-rw-r--r--	2024-03-19 22:46
mime.types	47.37 KB	-rw-r--r--	2024-03-19 22:46
mock_socket.py	3.7 KB	-rw-r--r--	2024-03-19 22:46
mod_generics_cache.py	1.13 KB	-rw-r--r--	2024-03-19 22:46
mp_fork_bomb.py	448 B	-rw-r--r--	2024-03-19 22:46
mp_preload.py	351 B	-rw-r--r--	2024-03-19 22:46
multibytecodec_support.py	14.19 KB	-rw-r--r--	2024-03-19 22:46
nokia.pem	1.88 KB	-rw-r--r--	2024-03-19 22:46
nosan.pem	7.54 KB	-rw-r--r--	2024-03-19 22:46
nullbytecert.pem	5.31 KB	-rw-r--r--	2024-03-19 22:46
nullcert.pem	0 B	-rw-r--r--	2024-03-19 22:46
pickletester.py	141.12 KB	-rw-r--r--	2024-03-19 22:46
profilee.py	2.97 KB	-rw-r--r--	2024-03-19 22:46
pstats.pck	65.05 KB	-rw-r--r--	2024-03-19 22:46
pycacert.pem	5.53 KB	-rw-r--r--	2024-03-19 22:46
pycakey.pem	2.43 KB	-rw-r--r--	2024-03-19 22:46
pyclbr_input.py	648 B	-rw-r--r--	2024-03-19 22:46
pydoc_mod.py	961 B	-rw-r--r--	2024-03-19 22:46
pydocfodder.py	6.18 KB	-rw-r--r--	2024-03-19 22:46
pythoninfo.py	23.52 KB	-rw-r--r--	2024-03-19 22:46
randv2_32.pck	7.34 KB	-rw-r--r--	2024-03-19 22:46
randv2_64.pck	7.19 KB	-rw-r--r--	2024-03-19 22:46
randv3.pck	7.82 KB	-rw-r--r--	2024-03-19 22:46
re_tests.py	25.93 KB	-rwxr-xr-x	2024-03-19 22:46
recursion.tar	516 B	-rw-r--r--	2024-03-19 22:46
regrtest.py	1.26 KB	-rwxr-xr-x	2024-03-19 22:46
relimport.py	27 B	-rw-r--r--	2024-03-19 22:46
reperf.py	538 B	-rw-r--r--	2024-03-19 22:46
revocation.crl	800 B	-rw-r--r--	2024-03-19 22:46
sample_doctest.py	1.02 KB	-rw-r--r--	2024-03-19 22:46
sample_doctest_no_docstrings.py	227 B	-rw-r--r--	2024-03-19 22:46
sample_doctest_no_doctests.py	269 B	-rw-r--r--	2024-03-19 22:46
secp384r1.pem	256 B	-rw-r--r--	2024-03-19 22:46
selfsigned_pythontestdotnet.pem	2.08 KB	-rw-r--r--	2024-03-19 22:46
seq_tests.py	14.87 KB	-rw-r--r--	2024-03-19 22:46
sgml_input.html	8.1 KB	-rw-r--r--	2024-03-19 22:46
signalinterproctester.py	2.74 KB	-rw-r--r--	2024-03-19 22:46
sortperf.py	4.69 KB	-rw-r--r--	2024-03-19 22:46
ssl_cert.pem	1.53 KB	-rw-r--r--	2024-03-19 22:46
ssl_key.passwd.pem	2.59 KB	-rw-r--r--	2024-03-19 22:46
ssl_key.pem	2.43 KB	-rw-r--r--	2024-03-19 22:46
ssl_servers.py	7.11 KB	-rw-r--r--	2024-03-19 22:46
ssltests.py	1.03 KB	-rw-r--r--	2024-03-19 22:46
string_tests.py	68.03 KB	-rw-r--r--	2024-03-19 22:46
talos-2019-0758.pem	1.3 KB	-rw-r--r--	2024-03-19 22:46
test___all__.py	4.54 KB	-rw-r--r--	2024-03-19 22:46
test___future__.py	2.36 KB	-rw-r--r--	2024-03-19 22:46
test__locale.py	7.83 KB	-rw-r--r--	2024-03-19 22:46
test__opcode.py	3.05 KB	-rw-r--r--	2024-03-19 22:46
test__osx_support.py	13.64 KB	-rw-r--r--	2024-03-19 22:46
test__xxsubinterpreters.py	78.94 KB	-rw-r--r--	2024-03-19 22:46
test_abc.py	23.19 KB	-rw-r--r--	2024-03-19 22:46
test_abstract_numbers.py	1.49 KB	-rw-r--r--	2024-03-19 22:46
test_aifc.py	17.77 KB	-rw-r--r--	2024-03-19 22:46
test_argparse.py	181.08 KB	-rw-r--r--	2024-03-19 22:46
test_array.py	55.21 KB	-rwxr-xr-x	2024-03-19 22:46
test_asdl_parser.py	4.44 KB	-rw-r--r--	2024-03-19 22:46
test_ast.py	107.27 KB	-rw-r--r--	2024-03-19 22:46
test_asyncgen.py	46.8 KB	-rw-r--r--	2024-03-19 22:46
test_asynchat.py	9.4 KB	-rw-r--r--	2024-03-19 22:46
test_asyncore.py	26.13 KB	-rw-r--r--	2024-03-19 22:46
test_atexit.py	3.14 KB	-rw-r--r--	2024-03-19 22:46
test_audioop.py	28.24 KB	-rw-r--r--	2024-03-19 22:46
test_audit.py	6.46 KB	-rw-r--r--	2024-03-19 22:46
test_augassign.py	7.68 KB	-rw-r--r--	2024-03-19 22:46
test_base64.py	34.51 KB	-rw-r--r--	2024-03-19 22:46
test_baseexception.py	7.77 KB	-rw-r--r--	2024-03-19 22:46
test_bdb.py	43.63 KB	-rw-r--r--	2024-03-19 22:46
test_bigaddrspace.py	2.83 KB	-rw-r--r--	2024-03-19 22:46
test_bigmem.py	44.78 KB	-rw-r--r--	2024-03-19 22:46
test_binascii.py	19.27 KB	-rw-r--r--	2024-03-19 22:46
test_binhex.py	2.1 KB	-rw-r--r--	2024-03-19 22:46
test_binop.py	14.14 KB	-rw-r--r--	2024-03-19 22:46
test_bisect.py	15.71 KB	-rw-r--r--	2024-03-19 22:46
test_bool.py	12.73 KB	-rw-r--r--	2024-03-19 22:46
test_buffer.py	160.31 KB	-rw-r--r--	2024-03-19 22:46
test_bufio.py	2.58 KB	-rw-r--r--	2024-03-19 22:46
test_builtin.py	85.98 KB	-rw-r--r--	2024-03-19 22:46
test_bytes.py	76.03 KB	-rw-r--r--	2024-03-19 22:46
test_bz2.py	37.23 KB	-rw-r--r--	2024-03-19 22:46
test_c_locale_coercion.py	18.92 KB	-rw-r--r--	2024-03-19 22:46
test_calendar.py	51.02 KB	-rw-r--r--	2024-03-19 22:46
test_call.py	26.23 KB	-rw-r--r--	2024-03-19 22:46
test_cgi.py	22.26 KB	-rw-r--r--	2024-03-19 22:46
test_cgitb.py	2.54 KB	-rw-r--r--	2024-03-19 22:46
test_charmapcodec.py	1.77 KB	-rw-r--r--	2024-03-19 22:46
test_check_c_globals.py	1.02 KB	-rw-r--r--	2024-03-19 22:46
test_class.py	17.41 KB	-rw-r--r--	2024-03-19 22:46
test_clinic.py	43.03 KB	-rw-r--r--	2024-03-19 22:46
test_cmath.py	24.08 KB	-rw-r--r--	2024-03-19 22:46
test_cmd.py	6.1 KB	-rw-r--r--	2024-03-19 22:46
test_cmd_line.py	37.59 KB	-rw-r--r--	2024-03-19 22:46
test_cmd_line_script.py	33.43 KB	-rw-r--r--	2024-03-19 22:46
test_code.py	12.67 KB	-rw-r--r--	2024-03-19 22:46
test_code_module.py	5.53 KB	-rw-r--r--	2024-03-19 22:46
test_codeccallbacks.py	47.43 KB	-rw-r--r--	2024-03-19 22:46
test_codecencodings_cn.py	3.86 KB	-rw-r--r--	2024-03-19 22:46
test_codecencodings_hk.py	701 B	-rw-r--r--	2024-03-19 22:46
test_codecencodings_iso2022.py	3.65 KB	-rw-r--r--	2024-03-19 22:46
test_codecencodings_jp.py	4.79 KB	-rw-r--r--	2024-03-19 22:46
test_codecencodings_kr.py	2.96 KB	-rw-r--r--	2024-03-19 22:46
test_codecencodings_tw.py	681 B	-rw-r--r--	2024-03-19 22:46
test_codecmaps_cn.py	746 B	-rw-r--r--	2024-03-19 22:46
test_codecmaps_hk.py	386 B	-rw-r--r--	2024-03-19 22:46
test_codecmaps_jp.py	1.7 KB	-rw-r--r--	2024-03-19 22:46
test_codecmaps_kr.py	1.16 KB	-rw-r--r--	2024-03-19 22:46
test_codecmaps_tw.py	705 B	-rw-r--r--	2024-03-19 22:46
test_codecs.py	133.35 KB	-rw-r--r--	2024-03-19 22:46
test_codeop.py	9.18 KB	-rw-r--r--	2024-03-19 22:46
test_collections.py	92.15 KB	-rw-r--r--	2024-03-19 22:46
test_colorsys.py	3.83 KB	-rw-r--r--	2024-03-19 22:46
test_compare.py	3.74 KB	-rw-r--r--	2024-03-19 22:46
test_compile.py	46.33 KB	-rw-r--r--	2024-03-19 22:46
test_compileall.py	47.55 KB	-rw-r--r--	2024-03-19 22:46
test_complex.py	32.54 KB	-rw-r--r--	2024-03-19 22:46
test_concurrent_futures.py	56.63 KB	-rw-r--r--	2024-03-19 22:46
test_configparser.py	85.4 KB	-rw-r--r--	2024-03-19 22:46
test_contains.py	3.35 KB	-rw-r--r--	2024-03-19 22:46
test_context.py	30.63 KB	-rw-r--r--	2024-03-19 22:46
test_contextlib.py	36.9 KB	-rw-r--r--	2024-03-19 22:46
test_contextlib_async.py	20.67 KB	-rw-r--r--	2024-03-19 22:46
test_copy.py	26.63 KB	-rw-r--r--	2024-03-19 22:46
test_copyreg.py	4.39 KB	-rw-r--r--	2024-03-19 22:46
test_coroutines.py	63.79 KB	-rw-r--r--	2024-03-19 22:46
test_cprofile.py	6.33 KB	-rw-r--r--	2024-03-19 22:46
test_crashers.py	1.17 KB	-rw-r--r--	2024-03-19 22:46
test_crypt.py	4.14 KB	-rw-r--r--	2024-03-19 22:46
test_csv.py	52.99 KB	-rw-r--r--	2024-03-19 22:46
test_ctypes.py	199 B	-rw-r--r--	2024-03-19 22:46
test_curses.py	46.58 KB	-rw-r--r--	2024-03-19 22:46
test_dataclasses.py	126.75 KB	-rw-r--r--	2024-03-19 22:46
test_datetime.py	2.31 KB	-rw-r--r--	2024-03-19 22:46
test_dbm.py	6.11 KB	-rw-r--r--	2024-03-19 22:46
test_dbm_dumb.py	10.68 KB	-rw-r--r--	2024-03-19 22:46
test_dbm_gnu.py	6.51 KB	-rw-r--r--	2024-03-19 22:46
test_dbm_ndbm.py	5.12 KB	-rw-r--r--	2024-03-19 22:46
test_decimal.py	209.81 KB	-rw-r--r--	2024-03-19 22:46
test_decorators.py	14.42 KB	-rw-r--r--	2024-03-19 22:46
test_defaultdict.py	6.13 KB	-rw-r--r--	2024-03-19 22:46
test_deque.py	33.63 KB	-rw-r--r--	2024-03-19 22:46
test_descr.py	192.65 KB	-rw-r--r--	2024-03-19 22:46
test_descrtut.py	11.57 KB	-rw-r--r--	2024-03-19 22:46
test_devpoll.py	4.44 KB	-rw-r--r--	2024-03-19 22:46
test_dict.py	50.72 KB	-rw-r--r--	2024-03-19 22:46
test_dict_version.py	6.1 KB	-rw-r--r--	2024-03-19 22:46
test_dictcomps.py	5.15 KB	-rw-r--r--	2024-03-19 22:46
test_dictviews.py	13.69 KB	-rw-r--r--	2024-03-19 22:46
test_difflib.py	21.47 KB	-rw-r--r--	2024-03-19 22:46
test_difflib_expect.html	100.85 KB	-rw-r--r--	2024-03-19 22:46
test_dis.py	56.47 KB	-rw-r--r--	2024-03-19 22:46
test_distutils.py	587 B	-rw-r--r--	2024-03-19 22:46
test_doctest.py	101.1 KB	-rw-r--r--	2024-03-19 22:46
test_doctest.txt	300 B	-rw-r--r--	2024-03-19 22:46
test_doctest2.py	2.36 KB	-rw-r--r--	2024-03-19 22:46
test_doctest2.txt	392 B	-rw-r--r--	2024-03-19 22:46
test_doctest3.txt	82 B	-rw-r--r--	2024-03-19 22:46
test_doctest4.txt	244 B	-rw-r--r--	2024-03-19 22:46
test_docxmlrpc.py	8.67 KB	-rw-r--r--	2024-03-19 22:46
test_dtrace.py	5.14 KB	-rw-r--r--	2024-03-19 22:46
test_dynamic.py	4.29 KB	-rw-r--r--	2024-03-19 22:46
test_dynamicclassattribute.py	9.57 KB	-rw-r--r--	2024-03-19 22:46
test_eintr.py	584 B	-rw-r--r--	2024-03-19 22:46
test_embed.py	55.88 KB	-rw-r--r--	2024-03-19 22:46
test_ensurepip.py	12.2 KB	-rw-r--r--	2024-03-19 22:46
test_enum.py	121.13 KB	-rw-r--r--	2024-03-19 22:46
test_enumerate.py	8.46 KB	-rw-r--r--	2024-03-19 22:46
test_eof.py	3.02 KB	-rw-r--r--	2024-03-19 22:46
test_epoll.py	9.14 KB	-rw-r--r--	2024-03-19 22:46
test_errno.py	1.04 KB	-rw-r--r--	2024-03-19 22:46
test_exception_hierarchy.py	7.43 KB	-rw-r--r--	2024-03-19 22:46
test_exception_variations.py	3.86 KB	-rw-r--r--	2024-03-19 22:46
test_exceptions.py	90.94 KB	-rw-r--r--	2024-03-19 22:46
test_extcall.py	14.05 KB	-rw-r--r--	2024-03-19 22:46
test_faulthandler.py	30.11 KB	-rw-r--r--	2024-03-19 22:46
test_fcntl.py	7.43 KB	-rw-r--r--	2024-03-19 22:46
test_file.py	11.78 KB	-rw-r--r--	2024-03-19 22:46
test_file_eintr.py	10.61 KB	-rw-r--r--	2024-03-19 22:46
test_filecmp.py	10.33 KB	-rw-r--r--	2024-03-19 22:46
test_fileinput.py	40.18 KB	-rw-r--r--	2024-03-19 22:46
test_fileio.py	19.93 KB	-rw-r--r--	2024-03-19 22:46
test_finalization.py	14.66 KB	-rw-r--r--	2024-03-19 22:46
test_float.py	66.39 KB	-rw-r--r--	2024-03-19 22:46
test_flufl.py	1.55 KB	-rw-r--r--	2024-03-19 22:46
test_fnmatch.py	11.1 KB	-rw-r--r--	2024-03-19 22:46
test_fork1.py	3.24 KB	-rw-r--r--	2024-03-19 22:46
test_format.py	23.91 KB	-rw-r--r--	2024-03-19 22:46
test_fractions.py	29.7 KB	-rw-r--r--	2024-03-19 22:46
test_frame.py	6.22 KB	-rw-r--r--	2024-03-19 22:46
test_frozen.py	943 B	-rw-r--r--	2024-03-19 22:46
test_fstring.py	52.54 KB	-rw-r--r--	2024-03-19 22:46
test_ftplib.py	41.99 KB	-rw-r--r--	2024-03-19 22:46
test_funcattrs.py	14.86 KB	-rw-r--r--	2024-03-19 22:46
test_functools.py	102.67 KB	-rw-r--r--	2024-03-19 22:46
test_future.py	14.88 KB	-rw-r--r--	2024-03-19 22:46
test_future3.py	490 B	-rw-r--r--	2024-03-19 22:46
test_future4.py	222 B	-rw-r--r--	2024-03-19 22:46
test_future5.py	510 B	-rw-r--r--	2024-03-19 22:46
test_gc.py	45.92 KB	-rw-r--r--	2024-03-19 22:46
test_gdb.py	41.71 KB	-rw-r--r--	2024-03-19 22:46
test_generator_stop.py	943 B	-rw-r--r--	2024-03-19 22:46
test_generators.py	63.77 KB	-rw-r--r--	2024-03-19 22:46
test_genericalias.py	12.77 KB	-rw-r--r--	2024-03-19 22:46
test_genericclass.py	9.28 KB	-rw-r--r--	2024-03-19 22:46
test_genericpath.py	21.84 KB	-rw-r--r--	2024-03-19 22:46
test_genexps.py	7.63 KB	-rw-r--r--	2024-03-19 22:46
test_getopt.py	6.78 KB	-rw-r--r--	2024-03-19 22:46
test_getpass.py	6.29 KB	-rw-r--r--	2024-03-19 22:46
test_gettext.py	41.42 KB	-rw-r--r--	2024-03-19 22:46
test_glob.py	15.35 KB	-rw-r--r--	2024-03-19 22:46
test_global.py	1.38 KB	-rw-r--r--	2024-03-19 22:46
test_grammar.py	63.22 KB	-rw-r--r--	2024-03-19 22:46
test_graphlib.py	8.34 KB	-rw-r--r--	2024-03-19 22:46
test_grp.py	3.67 KB	-rw-r--r--	2024-03-19 22:46
test_gzip.py	30.63 KB	-rw-r--r--	2024-03-19 22:46
test_hash.py	11.45 KB	-rw-r--r--	2024-03-19 22:46
test_hashlib.py	44.92 KB	-rw-r--r--	2024-03-19 22:46
test_heapq.py	16.45 KB	-rw-r--r--	2024-03-19 22:46
test_hmac.py	25.41 KB	-rw-r--r--	2024-03-19 22:46
test_html.py	4.23 KB	-rw-r--r--	2024-03-19 22:46
test_htmlparser.py	32.93 KB	-rw-r--r--	2024-03-19 22:46
test_http_cookiejar.py	78.4 KB	-rw-r--r--	2024-03-19 22:46
test_http_cookies.py	18.71 KB	-rw-r--r--	2024-03-19 22:46
test_httplib.py	79.14 KB	-rw-r--r--	2024-03-19 22:46
test_httpservers.py	55.11 KB	-rw-r--r--	2024-03-19 22:46
test_idle.py	1014 B	-rw-r--r--	2024-03-19 22:46
test_imaplib.py	42.13 KB	-rw-r--r--	2024-03-19 22:46
test_imghdr.py	4.69 KB	-rw-r--r--	2024-03-19 22:46
test_imp.py	18.93 KB	-rw-r--r--	2024-03-19 22:46
test_index.py	8.37 KB	-rw-r--r--	2024-03-19 22:46
test_inspect.py	172.66 KB	-rw-r--r--	2024-03-19 22:46
test_int.py	28.32 KB	-rw-r--r--	2024-03-19 22:46
test_int_literal.py	6.89 KB	-rw-r--r--	2024-03-19 22:46
test_interpreters.py	22.48 KB	-rw-r--r--	2024-03-19 22:46
test_io.py	171.42 KB	-rw-r--r--	2024-03-19 22:46
test_ioctl.py	3.24 KB	-rw-r--r--	2024-03-19 22:46
test_ipaddress.py	116.78 KB	-rw-r--r--	2024-03-19 22:46
test_isinstance.py	12.96 KB	-rw-r--r--	2024-03-19 22:46
test_iter.py	36.76 KB	-rw-r--r--	2024-03-19 22:46
test_iterlen.py	7.1 KB	-rw-r--r--	2024-03-19 22:46
test_itertools.py	108.43 KB	-rw-r--r--	2024-03-19 22:46
test_keyword.py	1.97 KB	-rw-r--r--	2024-03-19 22:46
test_keywordonlyarg.py	6.89 KB	-rw-r--r--	2024-03-19 22:46
test_kqueue.py	8.76 KB	-rw-r--r--	2024-03-19 22:46
test_largefile.py	9.98 KB	-rw-r--r--	2024-03-19 22:46
test_lib2to3.py	318 B	-rw-r--r--	2024-03-19 22:46
test_linecache.py	9.64 KB	-rw-r--r--	2024-03-19 22:46
test_list.py	7.98 KB	-rw-r--r--	2024-03-19 22:46
test_listcomps.py	4.17 KB	-rw-r--r--	2024-03-19 22:46
test_lltrace.py	3.13 KB	-rw-r--r--	2024-03-19 22:46
test_locale.py	24.64 KB	-rw-r--r--	2024-03-19 22:46
test_logging.py	196.58 KB	-rw-r--r--	2024-03-19 22:46
test_long.py	54.55 KB	-rw-r--r--	2024-03-19 22:46
test_longexp.py	233 B	-rw-r--r--	2024-03-19 22:46
test_lzma.py	88.18 KB	-rw-r--r--	2024-03-19 22:46
test_mailbox.py	91.79 KB	-rw-r--r--	2024-03-19 22:46
test_mailcap.py	10.16 KB	-rw-r--r--	2024-03-19 22:46
test_marshal.py	20.46 KB	-rw-r--r--	2024-03-19 22:46
test_math.py	90.7 KB	-rw-r--r--	2024-03-19 22:46
test_memoryio.py	31.48 KB	-rw-r--r--	2024-03-19 22:46
test_memoryview.py	21.37 KB	-rw-r--r--	2024-03-19 22:46
test_metaclass.py	6.21 KB	-rw-r--r--	2024-03-19 22:46
test_mimetypes.py	13.85 KB	-rw-r--r--	2024-03-19 22:46
test_minidom.py	68.81 KB	-rw-r--r--	2024-03-19 22:46
test_mmap.py	31.06 KB	-rw-r--r--	2024-03-19 22:46
test_module.py	12.37 KB	-rw-r--r--	2024-03-19 22:46
test_modulefinder.py	12.2 KB	-rw-r--r--	2024-03-19 22:46
test_msilib.py	5.41 KB	-rw-r--r--	2024-03-19 22:46
test_multibytecodec.py	15.76 KB	-rw-r--r--	2024-03-19 22:46
test_multiprocessing_fork.py	477 B	-rw-r--r--	2024-03-19 22:46
test_multiprocessing_forkserver.py	392 B	-rw-r--r--	2024-03-19 22:46
test_multiprocessing_main_handling.py	11.57 KB	-rw-r--r--	2024-03-19 22:46
test_multiprocessing_spawn.py	277 B	-rw-r--r--	2024-03-19 22:46
test_named_expressions.py	20.62 KB	-rw-r--r--	2024-03-19 22:46
test_netrc.py	6.01 KB	-rw-r--r--	2024-03-19 22:46
test_nis.py	1.17 KB	-rw-r--r--	2024-03-19 22:46
test_nntplib.py	62.68 KB	-rw-r--r--	2024-03-19 22:46
test_ntpath.py	38.67 KB	-rw-r--r--	2024-03-19 22:46
test_numeric_tower.py	8 KB	-rw-r--r--	2024-03-19 22:46
test_opcache.py	529 B	-rw-r--r--	2024-03-19 22:46
test_opcodes.py	3.59 KB	-rw-r--r--	2024-03-19 22:46
test_openpty.py	600 B	-rw-r--r--	2024-03-19 22:46
test_operator.py	24.05 KB	-rw-r--r--	2024-03-19 22:46
test_optparse.py	61.02 KB	-rw-r--r--	2024-03-19 22:46
test_ordered_dict.py	31.61 KB	-rw-r--r--	2024-03-19 22:46
test_os.py	167.95 KB	-rw-r--r--	2024-03-19 22:46
test_ossaudiodev.py	7.07 KB	-rw-r--r--	2024-03-19 22:46
test_osx_env.py	1.31 KB	-rw-r--r--	2024-03-19 22:46
test_pathlib.py	109.86 KB	-rw-r--r--	2024-03-19 22:46
test_patma.py	84.78 KB	-rw-r--r--	2024-03-19 22:46
test_pdb.py	68.89 KB	-rw-r--r--	2024-03-19 22:46
test_peepholer.py	19.77 KB	-rw-r--r--	2024-03-19 22:46
test_pickle.py	19.71 KB	-rw-r--r--	2024-03-19 22:46
test_picklebuffer.py	4.99 KB	-rw-r--r--	2024-03-19 22:46
test_pickletools.py	4.13 KB	-rw-r--r--	2024-03-19 22:46
test_pipes.py	6.71 KB	-rw-r--r--	2024-03-19 22:46
test_pkg.py	9.59 KB	-rw-r--r--	2024-03-19 22:46
test_pkgutil.py	21.21 KB	-rw-r--r--	2024-03-19 22:46
test_platform.py	19.98 KB	-rw-r--r--	2024-03-19 22:46
test_plistlib.py	38.73 KB	-rw-r--r--	2024-03-19 22:46
test_poll.py	7.27 KB	-rw-r--r--	2024-03-19 22:46
test_popen.py	2.08 KB	-rw-r--r--	2024-03-19 22:46
test_poplib.py	17.54 KB	-rw-r--r--	2024-03-19 22:46
test_positional_only_arg.py	17.77 KB	-rw-r--r--	2024-03-19 22:46
test_posix.py	87.32 KB	-rw-r--r--	2024-03-19 22:46
test_posixpath.py	32.11 KB	-rw-r--r--	2024-03-19 22:46
test_pow.py	5.43 KB	-rw-r--r--	2024-03-19 22:46
test_pprint.py	50.31 KB	-rw-r--r--	2024-03-19 22:46
test_print.py	7.72 KB	-rw-r--r--	2024-03-19 22:46
test_profile.py	8.69 KB	-rw-r--r--	2024-03-19 22:46
test_property.py	11.35 KB	-rw-r--r--	2024-03-19 22:46
test_pstats.py	3.31 KB	-rw-r--r--	2024-03-19 22:46
test_pty.py	16.84 KB	-rw-r--r--	2024-03-19 22:46
test_pulldom.py	12.66 KB	-rw-r--r--	2024-03-19 22:46
test_pwd.py	4.29 KB	-rw-r--r--	2024-03-19 22:46
test_py_compile.py	11.44 KB	-rw-r--r--	2024-03-19 22:46
test_pyclbr.py	9.84 KB	-rw-r--r--	2024-03-19 22:46
test_pydoc.py	60.53 KB	-rw-r--r--	2024-03-19 22:46
test_pyexpat.py	28.42 KB	-rw-r--r--	2024-03-19 22:46
test_queue.py	20.51 KB	-rw-r--r--	2024-03-19 22:46
test_quopri.py	7.78 KB	-rw-r--r--	2024-03-19 22:46
test_raise.py	13.44 KB	-rw-r--r--	2024-03-19 22:46
test_random.py	55.18 KB	-rw-r--r--	2024-03-19 22:46
test_range.py	24.64 KB	-rw-r--r--	2024-03-19 22:46
test_re.py	112.86 KB	-rw-r--r--	2024-03-19 22:46
test_readline.py	14.24 KB	-rw-r--r--	2024-03-19 22:46
test_regrtest.py	49.5 KB	-rw-r--r--	2024-03-19 22:46
test_repl.py	3.96 KB	-rw-r--r--	2024-03-19 22:46
test_reprlib.py	15.13 KB	-rw-r--r--	2024-03-19 22:46
test_resource.py	7.04 KB	-rw-r--r--	2024-03-19 22:46
test_richcmp.py	11.91 KB	-rw-r--r--	2024-03-19 22:46
test_rlcompleter.py	7.1 KB	-rw-r--r--	2024-03-19 22:46
test_robotparser.py	10.88 KB	-rw-r--r--	2024-03-19 22:46
test_runpy.py	33.86 KB	-rw-r--r--	2024-03-19 22:46
test_sax.py	54.6 KB	-rw-r--r--	2024-03-19 22:46
test_sched.py	7.28 KB	-rw-r--r--	2024-03-19 22:46
test_scope.py	19.83 KB	-rw-r--r--	2024-03-19 22:46
test_script_helper.py	5.78 KB	-rw-r--r--	2024-03-19 22:46
test_secrets.py	4.28 KB	-rw-r--r--	2024-03-19 22:46
test_select.py	3.32 KB	-rw-r--r--	2024-03-19 22:46
test_selectors.py	18.27 KB	-rw-r--r--	2024-03-19 22:46
test_set.py	69.09 KB	-rw-r--r--	2024-03-19 22:46
test_setcomps.py	4.15 KB	-rw-r--r--	2024-03-19 22:46
test_shelve.py	6.02 KB	-rw-r--r--	2024-03-19 22:46
test_shlex.py	13.48 KB	-rw-r--r--	2024-03-19 22:46
test_shutil.py	105.72 KB	-rw-r--r--	2024-03-19 22:46
test_signal.py	48.8 KB	-rw-r--r--	2024-03-19 22:46
test_site.py	27.8 KB	-rw-r--r--	2024-03-19 22:46
test_slice.py	9.23 KB	-rw-r--r--	2024-03-19 22:46
test_smtpd.py	40.65 KB	-rw-r--r--	2024-03-19 22:46
test_smtplib.py	60.05 KB	-rw-r--r--	2024-03-19 22:46
test_smtpnet.py	2.99 KB	-rw-r--r--	2024-03-19 22:46
test_sndhdr.py	1.43 KB	-rw-r--r--	2024-03-19 22:46
test_socket.py	246.76 KB	-rw-r--r--	2024-03-19 22:46
test_socketserver.py	17.89 KB	-rw-r--r--	2024-03-19 22:46
test_sort.py	13.42 KB	-rw-r--r--	2024-03-19 22:46
test_source_encoding.py	9.03 KB	-rw-r--r--	2024-03-19 22:46
test_spwd.py	2.73 KB	-rw-r--r--	2024-03-19 22:46
test_sqlite.py	988 B	-rw-r--r--	2024-03-19 22:46
test_ssl.py	217.26 KB	-rw-r--r--	2024-03-19 22:46
test_startfile.py	1.7 KB	-rw-r--r--	2024-03-19 22:46
test_stat.py	8.58 KB	-rw-r--r--	2024-03-19 22:46
test_statistics.py	113.22 KB	-rw-r--r--	2024-03-19 22:46
test_strftime.py	7.54 KB	-rw-r--r--	2024-03-19 22:46
test_string.py	19.8 KB	-rw-r--r--	2024-03-19 22:46
test_string_literals.py	10.2 KB	-rw-r--r--	2024-03-19 22:46
test_stringprep.py	3.04 KB	-rw-r--r--	2024-03-19 22:46
test_strptime.py	34.42 KB	-rw-r--r--	2024-03-19 22:46
test_strtod.py	20.06 KB	-rw-r--r--	2024-03-19 22:46
test_struct.py	36.19 KB	-rw-r--r--	2024-03-19 22:46
test_structseq.py	4.42 KB	-rw-r--r--	2024-03-19 22:46
test_subclassinit.py	8.12 KB	-rw-r--r--	2024-03-19 22:46
test_subprocess.py	156.33 KB	-rw-r--r--	2024-03-19 22:46
test_sunau.py	5.98 KB	-rw-r--r--	2024-03-19 22:46
test_sundry.py	2.1 KB	-rw-r--r--	2024-03-19 22:46
test_super.py	9.6 KB	-rw-r--r--	2024-03-19 22:46
test_support.py	25.33 KB	-rw-r--r--	2024-03-19 22:46
test_symtable.py	9.36 KB	-rw-r--r--	2024-03-19 22:46
test_syntax.py	52.33 KB	-rw-r--r--	2024-03-19 22:46
test_sys.py	58.56 KB	-rw-r--r--	2024-03-19 22:46
test_sys_setprofile.py	13.19 KB	-rw-r--r--	2024-03-19 22:46
test_sys_settrace.py	62.72 KB	-rw-r--r--	2024-03-19 22:46
test_sysconfig.py	18.92 KB	-rw-r--r--	2024-03-19 22:46
test_syslog.py	2.71 KB	-rw-r--r--	2024-03-19 22:46
test_tabnanny.py	13.44 KB	-rw-r--r--	2024-03-19 22:46
test_tarfile.py	152.06 KB	-rw-r--r--	2024-03-19 22:46
test_tcl.py	31.54 KB	-rw-r--r--	2024-03-19 22:46
test_telnetlib.py	12.74 KB	-rw-r--r--	2024-03-19 22:46
test_tempfile.py	65.97 KB	-rw-r--r--	2024-03-19 22:46
test_textwrap.py	41.89 KB	-rw-r--r--	2024-03-19 22:46
test_thread.py	8.54 KB	-rw-r--r--	2024-03-19 22:46
test_threadedtempfile.py	1.87 KB	-rw-r--r--	2024-03-19 22:46
test_threading.py	59.46 KB	-rw-r--r--	2024-03-19 22:46
test_threading_local.py	6.66 KB	-rw-r--r--	2024-03-19 22:46
test_threadsignals.py	10.11 KB	-rw-r--r--	2024-03-19 22:46
test_time.py	39.93 KB	-rw-r--r--	2024-03-19 22:46
test_timeit.py	15.2 KB	-rw-r--r--	2024-03-19 22:46
test_timeout.py	11 KB	-rw-r--r--	2024-03-19 22:46
test_tix.py	1.05 KB	-rw-r--r--	2024-03-19 22:46
test_tk.py	546 B	-rw-r--r--	2024-03-19 22:46
test_tokenize.py	64.51 KB	-rw-r--r--	2024-03-19 22:46
test_trace.py	20.4 KB	-rw-r--r--	2024-03-19 22:46
test_traceback.py	54.55 KB	-rw-r--r--	2024-03-19 22:46
test_tracemalloc.py	39.17 KB	-rw-r--r--	2024-03-19 22:46
test_ttk_guionly.py	986 B	-rw-r--r--	2024-03-19 22:46
test_ttk_textonly.py	16.69 KB	-rw-r--r--	2024-03-19 22:46
test_tuple.py	18.85 KB	-rw-r--r--	2024-03-19 22:46
test_turtle.py	12.75 KB	-rw-r--r--	2024-03-19 22:46
test_type_annotations.py	3.7 KB	-rw-r--r--	2024-03-19 22:46
test_type_comments.py	10.54 KB	-rw-r--r--	2024-03-19 22:46
test_typechecks.py	2.55 KB	-rw-r--r--	2024-03-19 22:46
test_types.py	75.67 KB	-rw-r--r--	2024-03-19 22:46
test_typing.py	179.66 KB	-rw-r--r--	2024-03-19 22:46
test_ucn.py	9.52 KB	-rw-r--r--	2024-03-19 22:46
test_unary.py	1.63 KB	-rw-r--r--	2024-03-19 22:46
test_unicode.py	120.59 KB	-rw-r--r--	2024-03-19 22:46
test_unicode_file.py	5.71 KB	-rw-r--r--	2024-03-19 22:46
test_unicode_file_functions.py	6.74 KB	-rw-r--r--	2024-03-19 22:46
test_unicode_identifiers.py	984 B	-rw-r--r--	2024-03-19 22:46
test_unicodedata.py	16.21 KB	-rw-r--r--	2024-03-19 22:46
test_unittest.py	226 B	-rw-r--r--	2024-03-19 22:46
test_univnewlines.py	3.88 KB	-rw-r--r--	2024-03-19 22:46
test_unpack.py	3.01 KB	-rw-r--r--	2024-03-19 22:46
test_unpack_ex.py	9.91 KB	-rw-r--r--	2024-03-19 22:46
test_unparse.py	18.59 KB	-rw-r--r--	2024-03-19 22:46
test_urllib.py	70.08 KB	-rw-r--r--	2024-03-19 22:46
test_urllib2.py	78.97 KB	-rw-r--r--	2024-03-19 22:46
test_urllib2_localnet.py	25.5 KB	-rw-r--r--	2024-03-19 22:46
test_urllib2net.py	14.07 KB	-rw-r--r--	2024-03-19 22:46
test_urllib_response.py	1.89 KB	-rw-r--r--	2024-03-19 22:46
test_urllibnet.py	9.32 KB	-rw-r--r--	2024-03-19 22:46
test_urlparse.py	67.31 KB	-rw-r--r--	2024-03-19 22:46
test_userdict.py	7.56 KB	-rw-r--r--	2024-03-19 22:46
test_userlist.py	1.97 KB	-rw-r--r--	2024-03-19 22:46
test_userstring.py	2.4 KB	-rw-r--r--	2024-03-19 22:46
test_utf8_mode.py	10.29 KB	-rw-r--r--	2024-03-19 22:46
test_utf8source.py	1.15 KB	-rw-r--r--	2024-03-19 22:46
test_uu.py	8.92 KB	-rw-r--r--	2024-03-19 22:46
test_uuid.py	40 KB	-rwxr-xr-x	2024-03-19 22:46
test_venv.py	22.63 KB	-rw-r--r--	2024-03-19 22:46
test_wait3.py	1.81 KB	-rw-r--r--	2024-03-19 22:46
test_wait4.py	1.16 KB	-rw-r--r--	2024-03-19 22:46
test_wave.py	6.5 KB	-rw-r--r--	2024-03-19 22:46
test_weakref.py	73.74 KB	-rw-r--r--	2024-03-19 22:46
test_weakset.py	15.42 KB	-rw-r--r--	2024-03-19 22:46
test_webbrowser.py	10.6 KB	-rw-r--r--	2024-03-19 22:46
test_winconsoleio.py	6.57 KB	-rw-r--r--	2024-03-19 22:46
test_winreg.py	22.2 KB	-rw-r--r--	2024-03-19 22:46
test_winsound.py	4.61 KB	-rw-r--r--	2024-03-19 22:46
test_with.py	25.99 KB	-rw-r--r--	2024-03-19 22:46
test_wsgiref.py	30.2 KB	-rw-r--r--	2024-03-19 22:46
test_xdrlib.py	2.17 KB	-rw-r--r--	2024-03-19 22:46
test_xml_dom_minicompat.py	4.18 KB	-rw-r--r--	2024-03-19 22:46
test_xml_etree.py	160.6 KB	-rw-r--r--	2024-03-19 22:46
test_xml_etree_c.py	8.48 KB	-rw-r--r--	2024-03-19 22:46
test_xmlrpc.py	57.66 KB	-rw-r--r--	2024-03-19 22:46
test_xmlrpc_net.py	954 B	-rw-r--r--	2024-03-19 22:46
test_xxlimited.py	2.13 KB	-rw-r--r--	2024-03-19 22:46
test_xxtestfuzz.py	690 B	-rw-r--r--	2024-03-19 22:46
test_yield_from.py	30.09 KB	-rw-r--r--	2024-03-19 22:46
test_zipapp.py	15.92 KB	-rw-r--r--	2024-03-19 22:46
test_zipfile.py	131.16 KB	-rw-r--r--	2024-03-19 22:46
test_zipfile64.py	5.86 KB	-rw-r--r--	2024-03-19 22:46
test_zipimport.py	33.56 KB	-rw-r--r--	2024-03-19 22:46
test_zipimport_support.py	10.46 KB	-rw-r--r--	2024-03-19 22:46
test_zlib.py	34.31 KB	-rw-r--r--	2024-03-19 22:46
testcodec.py	1.02 KB	-rw-r--r--	2024-03-19 22:46
testtar.tar	425 KB	-rw-r--r--	2024-03-19 22:46
testtar.tar.xz	172 B	-rw-r--r--	2024-03-19 22:46
tf_inherit_check.py	714 B	-rw-r--r--	2024-03-19 22:46
time_hashlib.py	2.87 KB	-rw-r--r--	2024-03-19 22:46
tokenize_tests-latin1-coding-cookie-and-utf8-bom-sig.txt	443 B	-rw-r--r--	2024-03-19 22:46
tokenize_tests-no-coding-cookie-and-utf8-bom-sig-only.txt	302 B	-rw-r--r--	2024-03-19 22:46
tokenize_tests-utf8-coding-cookie-and-no-utf8-bom-sig.txt	421 B	-rw-r--r--	2024-03-19 22:46
tokenize_tests-utf8-coding-cookie-and-utf8-bom-sig.txt	326 B	-rw-r--r--	2024-03-19 22:46
tokenize_tests.txt	2.65 KB	-rw-r--r--	2024-03-19 22:46
win_console_handler.py	1.38 KB	-rw-r--r--	2024-03-19 22:46
xmltests.py	499 B	-rw-r--r--	2024-03-19 22:46
zip_cp437_header.zip	270 B	-rw-r--r--	2024-03-19 22:46
zipdir.zip	374 B	-rw-r--r--	2024-03-19 22:46

Rename

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command #"testparm" # to check that you have not made any basic syntactic #errors. 
#
#======================= Global Settings =====================================
[global]

# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
   
  workgroup = MDKGROUP

# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname

;  netbios name = <name_of_this_server>

# server string is the equivalent of the NT Description field
   
  server string = Samba Server %v

# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s

# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in linux-mandrake 7.2 by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   
   printcap name = lpstat
   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
   
  printing = cups

# Samba 2.2 supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to 
# enable it below.
# This parameter works like domain admin group:
# printer admin = @<group> <user>
;   printer admin = @adm
# This should work well for winbind:
;   printer admin = @"Domain Admins"

# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects

log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Set the log (verbosity) level (0 <= log level <= 10)
; log level = 3

# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution #does
# not work for all the hosts in your network.
;   hosts allow = 192.168.1. 192.168.2. 127.

hosts allow = 127.  //note this is only my private IP address

# Uncomment this if you want a guest account, you must add this to
# /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# Security mode. Most people will want user level security. See
# security_level.txt for details.

security = user

# Use password server option only with security = server or security = # domain
# When using security = domain, you should use password server = *
;   password server = 
;   password server = *

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.

password level = 8

;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT #domain
# The smbpasswd file is only required by a server doing authentication, #thus members of a domain do not need one.

encrypt passwords = yes
  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
# You either need to setup a passwd program and passwd chat, or
# enable pam password change
;  pam password change = yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* 
# %n\n
;*passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customize your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to
# unix uid's 
# and gid's. winbind uid and winbind gid are the only required
# parameters.
#
# winbind uid is the range of uid's winbind can use when mapping RIDs #to uid's
;  winbind uid = 10000-20000
#
# winbind gid is the range of uid's winbind can use when mapping RIDs
# to gid's
;  winbind gid = 10000-20000
#
# winbind separator is the character a user must use between their
# domain name and username, defaults to "\"
;  winbind separator = +
#
# winbind use default domain allows you to have winbind return
# usernames in the form user instead of DOMAIN+user for the domain
# listed in the workgroup parameter.
;  winbind use default domain = yes
#
# template homedir determines the home directory for winbind users,
# with %D expanding to their domain name and %U expanding to their
# username:
;  template homedir = /home/%D/%U

# When using winbind, you may want to have samba create home
# directories on the fly for authenticated users. Ensure that 
# /etc/pam.d/samba is using 'service=system-auth-winbind' in pam_stack 
# modules, and then enable obedience of pam restrictions below:
;  obey pam restrictions = yes

#
# template shell determines the shell users authenticated by winbind #get
;  template shell = /bin/bash

# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details

socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on
# startup and gives it a slightly higher chance of winning the election
;   preferred master = yes

# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations or Primary Domain Controller for WinNT and
# Win2k

;  domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roaming profiles for WinNT and Win2k
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Where to store roaming profiles for Win9x. Be careful with this as it
# also impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile

# The add user script is used by a domain member to add local user
# accounts that have been authenticated by the domain controller, or by 
# the domain controller to add local machine accounts when adding 
# machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a 
# group.
# Script for domain controller for adding machines:
; add user script = /usr/sbin/useradd -d /dev/null -g machines –c
# 'Machine Account' -s /bin/false -M %u
# Script for domain controller with LDAP backend for adding machines 
#(please
# configure in /etc/samba/smbldap_conf.pm first):
; add user script = /usr/share/samba/scripts/smbldap-useradd.pl -w –d
# /dev/null -g machines -c 'Machine Account' -s /bin/false %u
# Script for domain member for adding local accounts for authenticated
# users:
; add user script = /usr/sbin/useradd -s /bin/false %u

# Domain groups:
# domain admin group is a list of unix users or groups who are made
# members
# of the Domain Admin group
; domain admin group = root @wheel
#
# domain guest groups is a list of unix users or groups who are made
# members
# of the Domain Guests group
; domain guest group = nobody @guest

# LDAP configuration for Domain Controlling:
# The account (dn) that samba uses to access the LDAP server
# This account needs to have write access to the LDAP tree
# You will need to give samba the password for this dn, by 
# running 'smbpasswd -w mypassword'
; ldap admin dn = cn=root,dc=mydomain,dc=com
; ldap ssl = start_tls
# start_tls should run on 389, but samba defaults incorrectly to 636
; ldap port = 389
; ldap suffix = dc=mydomain,dc=com
; ldap server = ldap.mydomain.com

# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be
# specified the default order is "host lmhosts wins bcast". "host" 
# means use the unix system gethostbyname() function call that will use 
# either /etc/hosts OR DNS or NIS depending on the settings of 
# /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system 
# configuration dependent. This parameter is most often of use to 
# prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that
# are NOT on the local network segment  - OR - are not deliberately to 
# be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
# Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but 
# NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS 
# names  via DNS nslookups. The built-in default for versions 1.9.17 is 
# yes, this has been changed in version 1.9.18 to no.

dns proxy = no

# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean 
# Hangul),
# 950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
;   client code page = 850
;   character set = ISO8859-1

#============================ Share Definitions ==============================

[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# You can enable VFS recycle bin on a per share basis:
# Uncomment the next 2 lines (make sure you create a
# .recycle folder in the base of the share and ensure
# all users will have write access to it. See
# examples/VFS/recycle/REAME in samba-doc for details
;   vfs object = /usr/lib/samba/vfs/recycle.so
;   vfs options= /etc/samba/recycle.conf

# Un-comment the following and create the netlogon directory for Domain
# Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /var/lib/samba/netlogon
;   guest ok = yes
;   writable = no

#Uncomment the following 2 lines if you would like your login scripts
# to be created dynamically by ntlogon (check that you have it in the
# correct location (the default of the ntlogon rpm available in
# contribs)

;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon
;root postexec = rm -f /var/lib/samba/netlogon/%U.bat

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /var/lib/samba/profiles
;    browseable = no
;    guest ok = yes

# NOTE: If you have a CUPS print system there is no need to 
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you
# have to swap the 'print command' line below with the commented one.

[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# to allow user 'guest account' to print.
   guest ok = yes
   writable = no
   printable = yes
   create mode = 0700

# =====================================
# print command: see above for details.
# =====================================

print command = lpr-cups -P %p -o raw %s -r 
# using client side printer drivers.
;  print command = lpr-cups -P %p %s 
# using cups own drivers (use generic PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
;   lpq command = lpq -P %p
;   lprm command = cancel %p-%j

# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write 
# access to the directory and share definition to be able to upload the 
# drivers.
# For more information on this, please see the Printing Support Section
# of  /usr/share/doc/samba-/docs/Samba-HOWTO-Collection.pdf

[print$]
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   write list = @adm root

# A useful application of samba is to make a PDF-generation service
# To streamline this, install windows postscript drivers (preferably 
# colour)on the samba server, so that clients can automatically install
# them.

[pdf-generator]
   path = /var/tmp
   guest ok = No
   printable = Yes
   comment = PDF Generator (only valid users)
   #print command = /usr/share/samba/scripts/print-pdf file path win_path recipient IP &
   print command = /usr/share/samba/scripts/print-pdf %s ~%u \\\\\\\\%L\\\\%u %m %I &

# This one is useful for people to share files
[tmp]
   comment = Temporary file space
   path = /tmp
   read only = no
   public = yes
   echo command = cat %s; rm %s

# A publicly accessible directory, but read only, except for people in
# the "staff" group

;[public]
;   comment = Public Stuff
;   path = /home/samba/public
;   public = yes
;   writable = no
;   write list = @staff
# Audited directory through experimental VFS audit.so module:
# Uncomment next line.
;   vfs object = /usr/lib/samba/vfs/audit.so

# Other examples. 
#
# A private printer, usable only by Fred. Spool data will be placed in
# Fred's
# home directory. Note that fred must have write access to the spool 
# directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

-----------------------------------------------------------
# A private directory, usable only by Fred. Note that Fred requires 
# write access to the directory.

;[fredsdir]

[Agustin]
;   comment = Fred's Service
    comment = Agustin Private Files
;   path = /usr/somewhere/private
    path = /home/agustin/Documents
;   valid users = fred
    valid users = agustin
;   public = no
;   writable = yes
    writable = yes
;   printable = no

-----------------------------------------------------------

# a service which has a different directory for each machine that 
# connects this allows you to tailor configurations to incoming 
# machines. You could also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

-----------------------------------------------------------
# A publicly accessible directory, read/write to all users. Note that
# all files created in the directory by users will be owned by the 
# default user, so any user with access can delete any other user's 
# files. Obviously this directory must be writable by the default user. 
# Another user could of course be specified, in which case all files 
# would be owned by that user instead.

;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

-----------------------------------------------------------

# The following two entries demonstrate how to share a directory so 
# that two users can place files there that will be owned by the 
# specific users. In this setup, the directory should be writable by 
# both users and should have the sticky bit set on it to prevent abuse. 
# Obviously this could be extended to as many users as required.

;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765