Gecko [ www.foryou-vip.com ]

Name	Size	Permission	Date
a2disconf	15.89 KB	-rwxr-xr-x	2019-06-16 11:49
a2dismod	15.89 KB	-rwxr-xr-x	2019-06-16 11:49
a2dissite	15.89 KB	-rwxr-xr-x	2019-06-16 11:49
a2enconf	15.89 KB	-rwxr-xr-x	2019-06-16 11:49
a2enmod	15.89 KB	-rwxr-xr-x	2019-06-16 11:49
a2ensite	15.89 KB	-rwxr-xr-x	2019-06-16 11:49
a2query	9.64 KB	-rwxr-xr-x	2022-03-18 13:54
accessdb	10.23 KB	-rwxrwxrwx	2016-12-13 14:10
add-shell	860 B	-rwxrwxrwx	2017-04-02 19:10
addgnupghome	3.01 KB	-rwxrwxrwx	2019-02-07 21:57
addgroup	33.7 KB	-rwxrwxrwx	2016-06-27 00:55
adduser	33.7 KB	-rwxrwxrwx	2016-06-27 00:55
anacron	34.02 KB	-rwxr-xr-x	2017-05-29 18:36
apache2	651.16 KB	-rwxr-xr-x	2022-03-18 13:54
apache2ctl	7.05 KB	-rwxr-xr-x	2019-10-13 17:39
apachectl	7.05 KB	-rwxr-xr-x	2019-10-13 17:39
applygnupgdefaults	2.17 KB	-rwxrwxrwx	2019-02-07 21:57
arp	62.03 KB	-rwxrwxrwx	2016-12-26 06:58
arpaname	9.99 KB	-rwxr-xr-x	2022-03-19 14:43
arpd	46.84 KB	-rwxrwxrwx	2017-11-24 10:22
aspell-autobuildhash	13.22 KB	-rwxrwxrwx	2016-10-10 11:58
backup-manager	6.94 KB	-rwxrwxrwx	2016-08-23 12:51
bacula-console	44.77 KB	-rwxr-xr-x	2020-08-26 20:03
bacula-fd	239.47 KB	-rwxr-xr-x	2020-08-26 20:03
bconsole	44.77 KB	-rwxr-xr-x	2020-08-26 20:03
biosdecode	18.82 KB	-rwxrwxrwx	2016-09-01 04:59
bsmtp	18.52 KB	-rwxr-xr-x	2020-08-26 20:03
btraceback	2.27 KB	-rwxr-xr-x	2020-08-26 20:03
check_forensic	952 B	-rwxr-xr-x	2011-04-26 17:10
chgpasswd	57.8 KB	-rwxr-xr-x	2021-03-17 10:27
chpasswd	49.9 KB	-rwxr-xr-x	2021-03-17 10:27
chroot	38.88 KB	-rwxrwxrwx	2017-02-22 13:23
clamd	202.1 KB	-rwxr-xr-x	2022-05-27 11:18
clamonacc	190.09 KB	-rwxr-xr-x	2022-05-27 11:18
convertquota	71.74 KB	-rwxrwxrwx	2018-02-24 07:55
cpgr	52 KB	-rwxr-xr-x	2021-03-17 10:27
cppw	52 KB	-rwxr-xr-x	2021-03-17 10:27
cron	47.48 KB	-rwxr-xr-x	2021-10-29 22:04
dbconfig-generate-include	12.37 KB	-rwxrwxrwx	2017-01-05 20:23
dbconfig-load-include	5.57 KB	-rwxrwxrwx	2017-01-05 20:23
ddns-confgen	17.99 KB	-rwxr-xr-x	2022-03-19 14:43
delgroup	15.43 KB	-rwxrwxrwx	2016-06-27 00:55
deluser	15.43 KB	-rwxrwxrwx	2016-06-27 00:55
dmidecode	102.49 KB	-rwxrwxrwx	2016-09-01 04:59
dnssec-checkds	10.66 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-coverage	28.07 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-dsfromkey	50 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-dsfromkey-pkcs11	50 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-importkey	50 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-importkey-pkcs11	50 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-keyfromlabel	54 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-keyfromlabel-pkcs11	54 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-keygen	62 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-keygen-pkcs11	62 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-revoke	46 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-revoke-pkcs11	46 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-settime	54 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-settime-pkcs11	54 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-signzone	102.03 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-signzone-pkcs11	102.03 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-verify	46.01 KB	-rwxr-xr-x	2022-03-19 14:43
dnssec-verify-pkcs11	46.01 KB	-rwxr-xr-x	2022-03-19 14:43
dovecot	86.09 KB	-rwxr-xr-x	2021-01-05 13:19
dpkg-preconfigure	3.52 KB	-rwxrwxrwx	2017-05-21 19:08
dpkg-reconfigure	4.23 KB	-rwxrwxrwx	2017-05-21 19:08
e2freefrag	10.07 KB	-rwxrwxrwx	2020-07-25 11:03
e4crypt	22.07 KB	-rwxrwxrwx	2020-07-25 11:03
e4defrag	25.99 KB	-rwxrwxrwx	2020-07-25 11:03
edquota	80.11 KB	-rwxrwxrwx	2018-02-24 07:55
fdformat	30.66 KB	-rwxrwxrwx	2018-03-07 19:29
filefrag	14.02 KB	-rwxrwxrwx	2020-07-25 11:03
genccode	10.59 KB	-rwxr-xr-x	2021-10-12 12:29
gencmn	10.64 KB	-rwxr-xr-x	2021-10-12 12:29
genl	50.79 KB	-rwxrwxrwx	2017-11-24 10:22
gennorm2	43.38 KB	-rwxr-xr-x	2021-10-12 12:29
genrandom	10 KB	-rwxr-xr-x	2022-03-19 14:43
gensprep	18.98 KB	-rwxr-xr-x	2021-10-12 12:29
groupadd	57.86 KB	-rwxr-xr-x	2021-03-17 10:27
groupdel	53.65 KB	-rwxr-xr-x	2021-03-17 10:27
groupmems	53.84 KB	-rwxr-xr-x	2021-03-17 10:27
groupmod	68.22 KB	-rwxr-xr-x	2021-03-17 10:27
grpck	53.77 KB	-rwxr-xr-x	2021-03-17 10:27
grpconv	49.65 KB	-rwxr-xr-x	2021-03-17 10:27
grpunconv	49.65 KB	-rwxr-xr-x	2021-03-17 10:27
grub-bios-setup	790.19 KB	-rwxrwxrwx	2019-06-12 13:20
grub-install	996.58 KB	-rwxrwxrwx	2019-06-12 13:20
grub-macbless	777.88 KB	-rwxrwxrwx	2019-06-12 13:20
grub-mkconfig	7.82 KB	-rwxrwxrwx	2019-06-12 13:20
grub-mkdevicemap	204.47 KB	-rwxrwxrwx	2019-06-12 13:20
grub-probe	790.19 KB	-rwxrwxrwx	2019-06-12 13:20
grub-reboot	4.01 KB	-rwxrwxrwx	2019-06-12 13:20
grub-set-default	3.48 KB	-rwxrwxrwx	2019-06-12 13:20
httxt2dbm	9.99 KB	-rwxr-xr-x	2022-03-18 13:54
iconvconfig	22.66 KB	-rwxrwxrwx	2019-02-06 22:17
icupkg	19.18 KB	-rwxr-xr-x	2021-10-12 12:29
inetd	34.38 KB	-rwxrwxrwx	2017-01-02 11:49
install-sgmlcatalog	4.44 KB	-rwxrwxrwx	2016-11-07 08:06
invoke-rc.d	17.69 KB	-rwxrwxrwx	2017-05-02 12:20
ip6tables-apply	6.85 KB	-rwxrwxrwx	2017-04-12 11:41
iptables-apply	6.85 KB	-rwxrwxrwx	2017-04-12 11:41
irqbalance	55.38 KB	-rwxrwxrwx	2017-03-10 19:56
isc-hmac-fixup	9.99 KB	-rwxr-xr-x	2022-03-19 14:43
ispell-autobuildhash	15.39 KB	-rwxrwxrwx	2016-10-10 11:58
ldattach	30.71 KB	-rwxrwxrwx	2018-03-07 19:29
locale-gen	1.5 KB	-rwxrwxrwx	2017-07-31 16:32
logrotate	75.27 KB	-rwxrwxrwx	2017-01-07 19:54
logwatch	58 KB	-rwxr-xr-x	2017-01-21 17:44
make-ssl-cert	3.78 KB	-rwxrwxrwx	2017-04-28 21:58
mkinitramfs	10.01 KB	-rwxrwxrwx	2017-04-26 03:00
mklost+found	9.99 KB	-rwxrwxrwx	2020-07-25 11:03
mysqld	17.05 MB	-rwxr-xr-x	2021-03-22 19:49
named	622.24 KB	-rwxr-xr-x	2022-03-19 14:43
named-checkconf	34.19 KB	-rwxr-xr-x	2022-03-19 14:43
named-checkzone	30.19 KB	-rwxr-xr-x	2022-03-19 14:43
named-compilezone	30.19 KB	-rwxr-xr-x	2022-03-19 14:43
named-journalprint	9.99 KB	-rwxr-xr-x	2022-03-19 14:43
named-pkcs11	622.24 KB	-rwxr-xr-x	2022-03-19 14:43
named-rrchecker	13.99 KB	-rwxr-xr-x	2022-03-19 14:43
netfilter-persistent	1.05 KB	-rwxr-xr-x	2020-05-02 21:33
newusers	78.43 KB	-rwxr-xr-x	2021-03-17 10:27
nfnl_osf	13.99 KB	-rwxrwxrwx	2017-04-12 11:41
nginx	1.01 MB	-rwxr-xr-x	2021-06-07 21:02
nologin	5.99 KB	-rwxr-xr-x	2021-03-17 10:27
nsec3hash	10 KB	-rwxr-xr-x	2022-03-19 14:43
ntp-keygen	73.77 KB	-rwxrwxrwx	2018-02-15 12:45
ntp-wait	3.13 KB	-rwxrwxrwx	2018-02-15 12:45
ntpd	713.22 KB	-rwxrwxrwx	2018-02-15 12:45
ntpdate	75.17 KB	-rwxrwxrwx	2018-02-15 12:45
ntpdate-debian	534 B	-rwxrwxrwx	2018-02-15 12:45
ntptime	18.12 KB	-rwxrwxrwx	2018-02-15 12:45
ownership	10.13 KB	-rwxrwxrwx	2016-09-01 04:59
pam-auth-update	19.03 KB	-rwxrwxrwx	2017-05-27 17:44
pam_getenv	2.82 KB	-rwxrwxrwx	2017-05-27 17:44
pam_timestamp_check	10.37 KB	-rwxrwxrwx	2017-05-27 17:44
paperconfig	4.07 KB	-rwxrwxrwx	2016-11-11 12:28
passenger-memory-stats	5.65 KB	-rwxrwxrwx	2019-03-17 19:40
passenger-status	10.68 KB	-rwxrwxrwx	2019-03-17 19:40
phpdismod	7.11 KB	-rwxrwxrwx	2017-01-01 20:43
phpenmod	7.11 KB	-rwxrwxrwx	2017-01-01 20:43
phpquery	6.26 KB	-rwxrwxrwx	2017-01-01 20:43
pkcs11-destroy	9.99 KB	-rwxr-xr-x	2022-03-19 14:43
pkcs11-keygen	15.58 KB	-rwxr-xr-x	2022-03-19 14:43
pkcs11-list	9.99 KB	-rwxr-xr-x	2022-03-19 14:43
pkcs11-tokens	9.99 KB	-rwxr-xr-x	2022-03-19 14:43
pma-configure	299 B	-rwxr-xr-x	2020-10-23 11:41
pma-secure	157 B	-rwxr-xr-x	2020-10-23 11:41
postalias	17.99 KB	-rwxr-xr-x	2020-02-16 20:59
postcat	14.06 KB	-rwxr-xr-x	2020-02-16 20:59
postconf	175.28 KB	-rwxr-xr-x	2020-02-16 20:59
postdrop	14.12 KB	-rwxr-sr-x	2020-02-16 20:59
postfix	14.07 KB	-rwxr-xr-x	2020-02-16 20:59
postfix-add-filter	4.9 KB	-rwxrwxrwx	2020-02-16 20:59
postfix-add-policy	3.83 KB	-rwxrwxrwx	2020-02-16 20:59
postkick	9.99 KB	-rwxr-xr-x	2020-02-16 20:59
postlock	9.99 KB	-rwxr-xr-x	2020-02-16 20:59
postlog	10.15 KB	-rwxr-xr-x	2020-02-16 20:59
postmap	17.99 KB	-rwxr-xr-x	2020-02-16 20:59
postmulti	26.38 KB	-rwxr-xr-x	2020-02-16 20:59
postqueue	22.07 KB	-rwxr-sr-x	2020-02-16 20:59
postsuper	22.32 KB	-rwxr-xr-x	2020-02-16 20:59
posttls-finger	34.09 KB	-rwxrwxrwx	2020-02-16 20:59
pure-authd	18.41 KB	-rwxrwxrwx	2016-12-08 13:28
pure-ftpd	161.4 KB	-rwxrwxrwx	2016-12-08 13:28
pure-ftpd-control	1.68 KB	-rwxrwxrwx	2016-12-08 13:28
pure-ftpd-virtualchroot	165.4 KB	-rwxrwxrwx	2016-12-08 13:28
pure-ftpd-wrapper	12.16 KB	-rwxrwxrwx	2016-12-08 13:28
pure-ftpwho	22.02 KB	-rwxrwxrwx	2016-12-08 13:28
pure-mrtginfo	9.99 KB	-rwxrwxrwx	2016-12-08 13:28
pure-quotacheck	14.01 KB	-rwxrwxrwx	2016-12-08 13:28
pure-uploadscript	14.26 KB	-rwxrwxrwx	2016-12-08 13:28
pwck	49.84 KB	-rwxr-xr-x	2021-03-17 10:27
pwconv	45.74 KB	-rwxr-xr-x	2021-03-17 10:27
pwunconv	41.72 KB	-rwxr-xr-x	2021-03-17 10:27
qmqp-sink	13.99 KB	-rwxrwxrwx	2020-02-16 20:59
qmqp-source	18.01 KB	-rwxrwxrwx	2020-02-16 20:59
qshape	12.55 KB	-rwxrwxrwx	2020-02-16 20:59
quot	67.48 KB	-rwxrwxrwx	2018-02-24 07:55
quota_nld	75.8 KB	-rwxrwxrwx	2018-02-24 07:55
quotastats	14.38 KB	-rwxrwxrwx	2018-02-24 07:55
quotatool	26.45 KB	-rwxrwxrwx	2014-12-21 21:54
readprofile	18.59 KB	-rwxrwxrwx	2018-03-07 19:29
remove-default-ispell	2.86 KB	-rwxrwxrwx	2016-10-10 11:58
remove-default-wordlist	2.86 KB	-rwxrwxrwx	2016-10-10 11:58
remove-shell	904 B	-rwxrwxrwx	2017-04-02 19:10
repquota	72.05 KB	-rwxrwxrwx	2018-02-24 07:55
rmail	13.99 KB	-rwxrwxrwx	2020-02-16 20:59
rmt	55.03 KB	-rwxr-xr-x	2021-11-27 22:50
rmt-tar	55.03 KB	-rwxr-xr-x	2021-11-27 22:50
rndc	29.99 KB	-rwxr-xr-x	2022-03-19 14:43
rndc-confgen	17.99 KB	-rwxr-xr-x	2022-03-19 14:43
rpc.rquotad	75.96 KB	-rwxrwxrwx	2018-02-24 07:55
rsyslogd	636.3 KB	-rwxr-xr-x	2022-05-20 21:25
rtcwake	42.81 KB	-rwxrwxrwx	2018-03-07 19:29
safe_finger	10.08 KB	-rwxrwxrwx	2016-12-26 00:08
select-default-ispell	3.23 KB	-rwxrwxrwx	2016-10-10 11:58
select-default-wordlist	3.21 KB	-rwxrwxrwx	2016-10-10 11:58
sendmail	26.15 KB	-rwxr-xr-x	2020-02-16 20:59
service	9.83 KB	-rwxrwxrwx	2017-05-02 12:20
setquota	84.11 KB	-rwxrwxrwx	2018-02-24 07:55
smartctl	663.63 KB	-rwxrwxrwx	2016-07-30 19:10
smartd	591.07 KB	-rwxrwxrwx	2016-07-30 19:10
smtp-sink	30.93 KB	-rwxrwxrwx	2020-02-16 20:59
smtp-source	22.02 KB	-rwxrwxrwx	2020-02-16 20:59
snmpd	30.01 KB	-rwxr-xr-x	2020-08-04 17:15
split-logfile	2.36 KB	-rwxr-xr-x	2022-03-18 13:54
sshd	772.48 KB	-rwxrwxrwx	2019-07-15 15:32
tarcat	936 B	-rwxr-xr-x	2021-11-27 22:50
tcpd	10 KB	-rwxrwxrwx	2016-12-26 00:08
tcpdchk	22.13 KB	-rwxrwxrwx	2016-12-26 00:08
tcpdmatch	18.04 KB	-rwxrwxrwx	2016-12-26 00:08
tcpdump	1007.6 KB	-rwxr-xr-x	2020-11-10 15:22
tcptraceroute	1.56 KB	-rwxrwxrwx	2016-08-29 17:45
tcptraceroute.db	1.56 KB	-rwxrwxrwx	2016-08-29 17:45
traceroute	67.16 KB	-rwxrwxrwx	2016-08-29 17:45
try-from	10 KB	-rwxrwxrwx	2016-12-26 00:08
tsig-keygen	17.99 KB	-rwxr-xr-x	2022-03-19 14:43
tunelp	26.61 KB	-rwxrwxrwx	2018-03-07 19:29
tzconfig	106 B	-rwxr-xr-x	2019-10-11 09:23
ufw	4.4 KB	-rwx------	2017-01-10 22:16
unhide	38.26 KB	-rwxrwxrwx	2019-12-17 18:08
unhide-linux	38.26 KB	-rwxrwxrwx	2019-12-17 18:08
unhide-posix	10 KB	-rwxrwxrwx	2019-12-17 18:08
unhide-tcp	18.85 KB	-rwxrwxrwx	2019-12-17 18:08
unhide.rb	13.97 KB	-rwxrwxrwx	2015-11-09 01:23
unhide_rb	14.09 KB	-rwxrwxrwx	2019-12-17 18:08
update-ca-certificates	4.85 KB	-rwxr-xr-x	2021-03-13 18:38
update-catalog	9.15 KB	-rwxrwxrwx	2016-11-07 08:06
update-default-aspell	1 KB	-rwxrwxrwx	2016-10-10 11:58
update-default-ispell	9.68 KB	-rwxrwxrwx	2016-10-10 11:58
update-default-wordlist	7.5 KB	-rwxrwxrwx	2016-10-10 11:58
update-dictcommon-aspell	1 KB	-rwxrwxrwx	2016-10-10 11:58
update-dictcommon-hunspell	782 B	-rwxrwxrwx	2016-10-10 11:58
update-grub	64 B	-rwxrwxrwx	2019-06-12 13:20
update-grub2	64 B	-rwxrwxrwx	2019-06-12 13:20
update-gsfontmap	450 B	-rwxr-xr-x	2022-05-01 17:15
update-inetd	6.05 KB	-rwxrwxrwx	2017-01-15 12:37
update-initramfs	8.02 KB	-rwxrwxrwx	2017-03-06 23:42
update-locale	2.99 KB	-rwxrwxrwx	2016-03-21 00:45
update-mime	8.84 KB	-rwxrwxrwx	2016-05-01 13:20
update-passwd	30.41 KB	-rwxrwxrwx	2017-01-16 16:52
update-rc.d	15.69 KB	-rwxrwxrwx	2017-05-02 12:20
update-xmlcatalog	16.88 KB	-rwxrwxrwx	2016-11-07 15:53
upgrade-from-grub-legacy	1.49 KB	-rwxrwxrwx	2019-06-12 13:20
useradd	119.29 KB	-rwxr-xr-x	2021-03-17 10:27
userdel	82.49 KB	-rwxr-xr-x	2021-03-17 10:27
usermod	119.1 KB	-rwxr-xr-x	2021-03-17 10:27
validlocale	1.73 KB	-rwxrwxrwx	2016-03-21 00:45
vigr	60.22 KB	-rwxr-xr-x	2021-03-17 10:27
vipw	60.22 KB	-rwxr-xr-x	2021-03-17 10:27
visudo	200.34 KB	-rwxr-xr-x	2021-01-23 10:10
vpddecode	14.27 KB	-rwxrwxrwx	2016-09-01 04:59
warnquota	84.11 KB	-rwxrwxrwx	2018-02-24 07:55
xqmstats	14.36 KB	-rwxrwxrwx	2018-02-24 07:55
zic	42.54 KB	-rwxrwxrwx	2019-02-06 22:17

Rename

#!/bin/sh

# set some defaults
format="sh"
dbuser_varname="dbuser"
dbpass_varname="dbpass"
dbname_varname="dbname"
dbserver_varname="dbserver"
dbport_varname="dbport"
dbtype_varname="dbtype"
basepath_varname="basepath"

# the version will always be < the package version
VERSION="$Revision$"

version(){
	prog=$(basename $0)
	cat << EOF

$prog v$VERSION 
copyright (c) 2005 sean finney <seanius@debian.org>

EOF
}

usage(){
	version
	cat << EOF
usage: $prog [-hv] [-f format] [-a] [-d[varname]] [-u[varname]] [-p[varname]] [-s[varname]] [-P[varname]] [-t[varname]] [-C[comment]] [-O owner[:group]] [-m mode] [-U] infile [outfile]

infile            use the given dbconfig-common config file as input
	outfile           use the given file as input (default: stdout)
	-f|--format       use the given output format (default: sh)
	-o|--options		provide output-format-specific options
	-a|--all          include all information in output (default)
	-b|--basepath     include the basepath in the output
	-d|--dbname       include the dbname in the output
	-p|--dbpass       include the dbpass in the output
	-s|--dbserver     include the dbserver in the output
	-P|--dbport       include the dbport in the output
	-u|--dbuser       include the dbuser in the output
	-t|--dbtype       include the dbtype in the output
	-C|--comment      comment out unset variables
	-O|--owner        set the owner:group of the output file
	-m|--mode         set the permissions on the output file
	-U|--ucf          register the outputfile with ucf
	-h|--help         display this helpful message
	-v|--version      output the version and exit

format is one of a list of include-file style formats for various
	programming languages.  the current list includes:
		sh - /bin/sh style include file
		perl - perl parseable include file
		php - php parseable include file
		template - perform pattern substitution on a pre-existing template
		cpp - c-style header file, using #define'd constants

EOF
}

check_permissions(){
	local line
	if dpkg-statoverride --list "$outputfile" >/dev/null; then
		line=$(dpkg-statoverride --list "$outputfile")
		owner=$(echo $line | cut -d' ' -f1,2 | tr ' ' ':')
		perms=$(echo $line | cut -d' ' -f3)
	fi
}

# Protect strings for use in the right hand side of a sed "s" command
#
# Without protection, double backslashes are interpreted as one
# protected backslash, therefore "\\" -> "\\\\"
# Without protection, an & "refers to that portion of the pattern
# space which matched", therefore "&" -> "\\&"
# The / is used as the seperator, so it needs escaping too,
# therefore "/" -> "\\/"
sed_rhs_escape(){
    sed -e 's/\\/\\&/g' -e 's/&/\\&/g' -e 's,/,\\&,g' << EOF
$1
EOF
}

# Protect strings for use in shell files where the variable is
# quoted in single quotes
sh_sq_escape(){
	sed -e "s,','\\\\'',g" << EOF
$1
EOF
}

# Protect strings for use in php files where the variable is
# quoted in single quotes
php_sq_escape(){
	sed -e 's/\\/\\&/g' -e "s,',' . \"'\" . ',g" << EOF
$1
EOF
}

# Protect strings for use in perl files where the variable is
# quoted in single quotes
perl_sq_escape(){
	php_sq_escape "$1"
}

TEMP=$(getopt -o af:hb::d::m:o:p::u::s::t::C::O:P::Uv --long help,dbuser::,dbname::,dbpass::,dbport::,dbserver::,dbtype::,basepath::,output:,format:,options:,comment::,owner:,mode:,ucf,version -n $0 -- "$@")

if [ $? != 0 ] ; then usage >&2 ; exit 1 ; fi

eval set -- "$TEMP"

while true; do
	case "$1" in
	-a|--all)
		use_all="yes"
		shift
	;;
	-b|--basepath)
		use_basepath="yes"
		if [ ! -z "$2" ]; then
			basepath_varname="$2"
		fi
		shift 2
	;;
	-d|--dbname)
		use_dbname="yes"
		if [ ! -z "$2" ]; then
			dbname_varname="$2"
		fi
		shift 2
	;;
	-u|--dbuser)
		use_dbuser="yes"
		if [ ! -z "$2" ]; then
			dbuser_varname="$2"
		fi
		shift 2
	;;
	-p|--dbpass)
		use_dbpass="yes"
		if [ ! -z "$2" ]; then
			dbpass_varname="$2"
		fi
		shift 2
	;;
	-s|--dbserver)
		use_dbserver="yes"
		if [ ! -z "$2" ]; then
			dbserver_varname="$2"
		fi
		shift 2
	;;
	-P|--dbport)
		use_dbport="yes"
		if [ ! -z "$2" ]; then
			dbport_varname="$2"
		fi
		shift 2
	;;
	-t|--dbtype)
		use_dbtype="yes"
		if [ ! -z "$2" ]; then
			dbtype_varname="$2"
		fi
		shift 2
	;;
	-f|--format)
		format="$2"
		shift 2
	;;
	-C|--comment)
		use_comment="yes"
		if [ ! -z "$2" ]; then
			comment_string="$2"
		fi
		shift 2
	;;		
	-O|--owner)
		owner="$2"
		shift 2
	;;		
	-m|--mode)
		perms="$2"
		shift 2
	;;	
	-h|--help)
		usage
		exit
	;;
	-v|--version)
		version
		exit
	;;
	-U|--ucf)
		do_ucf=1
		shift
	;;
	-o|--options)
		eval $2
		shift 2
	;;
	--)
		shift
		break
	;;
	*)
		echo "eh? $1" >&2
		exit 1
	;;
	esac
done

# if they asked for all vars, or didn't ask for anything (which defaults to all)
if [ "$use_all" ] || [ ! "${use_dbuser}${use_dbpass}${use_basepath}${use_dbname}${use_dbserver}${use_dbtype}${use_dbport}" ]; then
		use_dbuser="yes"
		use_dbpass="yes"
		use_basepath="yes"
		use_dbname="yes"
		use_dbserver="yes"
		use_dbport="yes"
		use_dbtype="yes"
fi

inputfile=$1
outputfile=$2

if [ ! "$inputfile" ]; then
	echo "you must specify an inputfile" >&2
	usage >&2
	exit 1
fi

if [ "$outputfile" ]; then
	tmpout=$(mktemp -t dbconfig-generate-include.XXXXXX)
	if [ ! -f "$tmpout" ]; then
		echo "unable to create temporary file $tmpout" >&2
		exit 1
	fi
	if [ -e "$outputfile" ] ; then
		# In order to preserve all local attributes of the
		# original file, copy them to the tmpout file, so that
		# later on they are copied back (by ucf or mv command).
		cp --preserve=all --attributes-only "$outputfile" "$tmpout"
	fi
	exec > $tmpout
fi

if [ ! -f "$inputfile" ] || [ ! -r "$inputfile" ]; then
	echo "unable to read input file $inputfile" >&2
	exit 1
fi

if ! . $inputfile ; then
	echo "error processing $inputfile, check file contents" >&2
	exit 1
fi

# if commenting-out is enabled
if [ "$use_comment" ]; then
	# if a comment string was not explicitly specified set a default
	if [ ! "$comment_string" ]; then
		case $format in
		sh|php|perl)
			comment_string="#"
		;;
		cpp)
			comment_string="//"
		;;
		template)
			echo "E: must specify a comment string for 'template' format" >&2
			exit 1
		;;
		esac
	fi
	# now determine which things should be commented out if any
	[ ! "$dbc_dbuser" ] && comment_dbuser="${comment_string}"
	[ ! "$dbc_dbpass" ] && comment_dbpass="${comment_string}"
	[ ! "$dbc_basepath" ] && comment_basepath="${comment_string}"
	[ ! "$dbc_dbname" ] && comment_dbname="${comment_string}"
	[ ! "$dbc_dbserver" ] && comment_dbserver="${comment_string}"
	[ ! "$dbc_dbport" ] && comment_dbport="${comment_string}"
	[ ! "$dbc_dbtype" ] && comment_dbtype="${comment_string}"
fi

case $format in
sh)
	cat << EOF 
##
## database access settings in /bin/sh format
## automatically generated from $inputfile
## by $0
##
## by default this file is managed via ucf, so you shouldn't have to
## worry about manual changes being silently discarded.  *however*,
## you'll probably also want to edit the configuration file mentioned
## above too.
##

EOF
	[ "$use_dbuser" ] && echo "${comment_dbuser}$dbuser_varname='$(sh_sq_escape "$dbc_dbuser")'"
	[ "$use_dbpass" ] && echo "${comment_dbpass}$dbpass_varname='$(sh_sq_escape "$dbc_dbpass")'"
	[ "$use_basepath" ] && echo "${comment_basepath}$basepath_varname='$(sh_sq_escape "$dbc_basepath")'"
	[ "$use_dbname" ] && echo "${comment_dbname}$dbname_varname='$(sh_sq_escape "$dbc_dbname")'"
	[ "$use_dbserver" ] && echo "${comment_dbserver}$dbserver_varname='$(sh_sq_escape "$dbc_dbserver")'"
	[ "$use_dbport" ] && echo "${comment_dbport}$dbport_varname='$(sh_sq_escape "$dbc_dbport")'"
	[ "$use_dbtype" ] && echo "${comment_dbtype}$dbtype_varname='$(sh_sq_escape "$dbc_dbtype")'"
;;

php)
	cat << EOF 
<?php
##
## database access settings in php format
## automatically generated from $inputfile
## by $0
##
## by default this file is managed via ucf, so you shouldn't have to
## worry about manual changes being silently discarded.  *however*,
## you'll probably also want to edit the configuration file mentioned
## above too.
##
EOF
	[ "$use_dbuser" ] && echo "${comment_dbuser}\$$dbuser_varname='$(php_sq_escape "$dbc_dbuser")';"
	[ "$use_dbpass" ] && echo "${comment_dbpass}\$$dbpass_varname='$(php_sq_escape "$dbc_dbpass")';"
	[ "$use_basepath" ] && echo "${comment_basepath}\$$basepath_varname='$(php_sq_escape "$dbc_basepath")';"
	[ "$use_dbname" ] && echo "${comment_dbname}\$$dbname_varname='$(php_sq_escape "$dbc_dbname")';"
	[ "$use_dbserver" ] && echo "${comment_dbserver}\$$dbserver_varname='$(php_sq_escape "$dbc_dbserver")';"
	[ "$use_dbport" ] && echo "${comment_dbport}\$$dbport_varname='$(php_sq_escape "$dbc_dbport")';"
	[ "$use_dbtype" ] && echo "${comment_dbtype}\$$dbtype_varname='$(php_sq_escape "$dbc_dbtype")';"
	cat << EOF 
EOF
;;

perl)
	cat << EOF 
##
## database access settings in perl format
## automatically generated from $inputfile
## by $0
##
## by default this file is managed via ucf, so you shouldn't have to
## worry about manual changes being silently discarded.  *however*,
## you'll probably also want to edit the configuration file mentioned
## above too.
##
EOF
	[ "$use_dbuser" ] && echo "${comment_dbuser}our \$$dbuser_varname='$(perl_sq_escape "$dbc_dbuser")';"
	[ "$use_dbpass" ] && echo "${comment_dbpass}our \$$dbpass_varname='$(perl_sq_escape "$dbc_dbpass")';"
	[ "$use_basepath" ] && echo "${comment_basepath}our \$$basepath_varname='$(perl_sq_escape "$dbc_basepath")';"
	[ "$use_dbname" ] && echo "${comment_dbname}our \$$dbname_varname='$(perl_sq_escape "$dbc_dbname")';"
	[ "$use_dbserver" ] && echo "${comment_dbserver}our \$$dbserver_varname='$(perl_sq_escape "$dbc_dbserver")';"
	[ "$use_dbport" ] && echo "${comment_dbport}our \$$dbport_varname='$(perl_sq_escape "$dbc_dbport")';"
	[ "$use_dbtype" ] && echo "${comment_dbtype}our \$$dbtype_varname='$(perl_sq_escape "$dbc_dbtype")';"
	cat << EOF 
1;
EOF
;;
cpp)
	cat << EOF 
/*
 * database access settings in cpp header format
 * why you would ever need this, who knows? :)
 * automatically generated from $inputfile
 * by $0
 *
 * by default this file is managed via ucf, so you shouldn't have to
 * worry about manual changes being silently discarded.  *however*,
 * you'll probably also want to edit the configuration file mentioned
 * above too.
 *
 */
#ifndef _DBCONFIG_COMMON_CONFIG_
 #define _DBCONFIG_COMMON_CONFIG_
EOF
	[ "$use_dbuser" ] && echo " ${comment_dbuser}#define $dbuser_varname \"$dbc_dbuser\";"
	[ "$use_dbpass" ] && echo " ${comment_dbpass}#define $dbpass_varname \"$dbc_dbpass\";"
	[ "$use_basepath" ] && echo "${comment_basepath}#define $basepath_varname \"$dbc_basepath\";"
	[ "$use_dbname" ] && echo " ${comment_dbname}#define $dbname_varname \"$dbc_dbname\";"
	[ "$use_dbserver" ] && echo " ${comment_dbserver}#define $dbserver_varname \"$dbc_dbserver\";"
	[ "$use_dbport" ] && echo " ${comment_dbport}#define $dbport_varname \"$dbc_dbport\";"
	[ "$use_dbtype" ] && echo " ${comment_dbtype}#define $dbtype_varname \"$dbc_dbtype\";"
	cat << EOF 
#endif /* _DBCONFIG_COMMON_CONFIG_ */
EOF
;;
template)
	if [ ! "$template_infile" ]; then
		cat << EOF >&2
error: you must specify a template file. for example: '-o template_infile=foo'
EOF
		exit 1
	elif [ ! -f "$template_infile" ]; then
		echo "error: template infile $template_infile does not exist" >&2
		exit 1
	fi
	sedtmp=$(mktemp -t dbconfig-generate-include.sed.XXXXXX)
	if [ ! -f "$sedtmp" ]; then
		echo "unable to create temporary file $sedtmp" >&2
		exit 1
	fi
	# we do not want _DBC_DBSERVER_ to be expanded to "" (which means "use
	# the best available method to connect to the local db): expand it to
	# "localhost" if needed
	if [ -z "$dbc_dbserver" ] ; then
		_dbc_dbserver="localhost"
	else
		_dbc_dbserver="$dbc_dbserver"
	fi
	cat << EOF > "$sedtmp"
s/^$.*$_DBC_DBUSER_/${comment_dbuser}\1$(sed_rhs_escape "$dbc_dbuser")/g
s/^$.*$_DBC_DBPASS_/${comment_dbpass}\1$(sed_rhs_escape "$dbc_dbpass")/g
s/^$.*$_DBC_BASEPATH_/${comment_basepath}\1$(sed_rhs_escape "$dbc_basepath")/g
s/^$.*$_DBC_DBNAME_/${comment_dbname}\1$(sed_rhs_escape "$dbc_dbname")/g
s/^$.*$_DBC_DBSERVER_/${comment_dbserver}\1$(sed_rhs_escape "$_dbc_dbserver")/g
s/^$.*$_DBC_DBPORT_/${comment_dbport}\1$(sed_rhs_escape "$dbc_dbport")/g
s/^$.*$_DBC_DBTYPE_/${comment_dbtype}\1$(sed_rhs_escape "$dbc_dbtype")/g
EOF
	sed -f "$sedtmp" < "$template_infile" 
	rm -f "$sedtmp"
;;
esac

if [ "$outputfile" ]; then
	if [ "$do_ucf" ]; then
		ucf --debconf-ok "$tmpout" "$outputfile" >&2
		rm -f "$tmpout"
	else
		mv "$tmpout" "$outputfile"
	fi
	check_permissions
	if [ -e "$outputfile" ] ; then
	    [ "$owner" ] && chown $owner $outputfile
	    [ "$perms" ] && chmod $perms $outputfile
	fi
fi

exit 0