Gecko [ www.foryou-vip.com ]

Name	Size	Permission	Date
ImageMagick-6	[ DIR ]	drwxr-xr-x	2024-03-12 22:00
NetworkManager	[ DIR ]	drwxr-xr-x	2020-08-24 23:55
X11	[ DIR ]	drwxr-xr-x	2025-06-04 09:25
alternatives	[ DIR ]	drwxr-xr-x	2025-06-04 09:26
apache2	[ DIR ]	drwxr-xr-x	2025-12-15 23:46
apm	[ DIR ]	drwxr-xr-x	2024-10-04 13:00
apparmor	[ DIR ]	drwxr-xr-x	2020-08-24 23:55
apparmor.d	[ DIR ]	drwxr-xr-x	2025-11-03 08:37
apt	[ DIR ]	drwxr-xr-x	2025-11-03 08:37
bacula	[ DIR ]	drwxr-xr-x	2025-07-14 12:23
bash_completion.d	[ DIR ]	drwxr-xr-x	2022-11-21 13:38
bind	[ DIR ]	drwxr-sr-x	2022-03-20 10:37
binfmt.d	[ DIR ]	drwxr-xr-x	2017-06-04 22:58
ca-certificates	[ DIR ]	drwxr-xr-x	2017-06-20 12:02
calendar	[ DIR ]	drwxr-xr-x	2017-06-20 11:41
clamav	[ DIR ]	drwxr-xr-x	2025-11-03 08:37
cron.d	[ DIR ]	drwxr-xr-x	2024-10-04 13:00
cron.daily	[ DIR ]	drwxr-xr-x	2024-10-04 13:00
cron.hourly	[ DIR ]	drwxr-xr-x	2024-10-04 12:56
cron.monthly	[ DIR ]	drwxr-xr-x	2024-10-04 13:00
cron.weekly	[ DIR ]	drwxr-xr-x	2024-10-04 13:00
crowdsec	[ DIR ]	drwxr-xr-x	2024-10-04 08:20
dbconfig-common	[ DIR ]	drwxr-xr-x	2020-08-24 23:55
dbus-1	[ DIR ]	drwxr-xr-x	2020-08-24 23:43
default	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
dhcp	[ DIR ]	drwxr-xr-x	2022-03-20 10:36
dictionaries-common	[ DIR ]	drwxr-xr-x	2020-08-24 23:55
dovecot	[ DIR ]	drwxr-xr-x	2020-08-24 23:53
dpkg	[ DIR ]	drwxr-xr-x	2024-03-12 22:01
emacs	[ DIR ]	drwxr-xr-x	2020-08-24 23:50
exim4	[ DIR ]	drwxr-xr-x	2020-08-24 23:46
fail2ban	[ DIR ]	drwxr-xr-x	2023-04-12 08:02
fonts	[ DIR ]	drwxr-xr-x	2020-08-24 23:52
ghostscript	[ DIR ]	drwxr-xr-x	2020-08-24 23:49
groff	[ DIR ]	drwxr-xr-x	2020-08-24 23:50
grub.d	[ DIR ]	drwxr-xr-x	2020-08-24 23:44
gss	[ DIR ]	drwxr-xr-x	2017-06-20 12:02
init	[ DIR ]	drwxr-xr-x	2024-10-04 13:00
init.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
initramfs-tools	[ DIR ]	drwxr-xr-x	2020-08-24 23:44
insserv	[ DIR ]	drwxr-xr-x	2017-06-20 12:01
insserv.conf.d	[ DIR ]	drwxr-xr-x	2024-10-04 13:32
iproute2	[ DIR ]	drwxr-xr-x	2017-12-13 11:50
iptables	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
kernel	[ DIR ]	drwxr-xr-x	2020-08-24 23:44
ld.so.conf.d	[ DIR ]	drwxr-xr-x	2020-08-24 23:50
ldap	[ DIR ]	drwxr-xr-x	2024-03-12 22:00
letsencrypt	[ DIR ]	drwxr-xr-x	2025-12-15 23:46
libnl-3	[ DIR ]	drwxr-xr-x	2020-08-24 23:56
libpaper.d	[ DIR ]	drwxr-xr-x	2016-11-11 12:28
lighttpd	[ DIR ]	drwxr-xr-x	2020-08-24 23:51
logcheck	[ DIR ]	drwxr-xr-x	2024-10-04 13:32
logrotate.d	[ DIR ]	drwxr-xr-x	2025-11-03 08:37
logwatch	[ DIR ]	drwxr-xr-x	2023-03-10 11:53
mdadm	[ DIR ]	drwxr-xr-x	2018-02-14 11:37
modprobe.d	[ DIR ]	drwxr-xr-x	2018-02-14 11:37
modules-load.d	[ DIR ]	drwxr-xr-x	2024-03-12 22:00
monit	[ DIR ]	drwxr-xr-x	2018-02-15 10:51
mysql	[ DIR ]	drwxr-xr-x	2024-10-04 13:32
network	[ DIR ]	drwxr-xr-x	2021-03-17 19:42
newt	[ DIR ]	drwxr-xr-x	2017-06-20 11:41
nginx	[ DIR ]	drwxr-xr-x	2024-03-12 14:15
opt	[ DIR ]	drwxr-xr-x	2017-06-20 11:40
pam.d	[ DIR ]	drwxr-xr-x	2024-03-12 22:01
perl	[ DIR ]	drwxr-xr-x	2020-08-24 23:43
php	[ DIR ]	drwxr-xr-x	2020-08-24 23:49
phpmyadmin	[ DIR ]	drwxr-xr-x	2024-10-04 09:06
postfix	[ DIR ]	drwxr-xr-x	2024-10-04 08:47
ppp	[ DIR ]	drwxr-xr-x	2018-02-15 10:51
profile.d	[ DIR ]	drwxr-xr-x	2017-04-04 18:00
pure-ftpd	[ DIR ]	drwxr-xr-x	2021-01-31 21:46
python	[ DIR ]	drwxr-xr-x	2018-02-15 10:51
python2.7	[ DIR ]	drwxr-xr-x	2022-03-20 10:36
python3	[ DIR ]	drwxr-xr-x	2018-02-15 10:51
python3.5	[ DIR ]	drwxr-xr-x	2022-03-20 10:36
rc0.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
rc1.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
rc2.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
rc3.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
rc4.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
rc5.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
rc6.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
rcS.d	[ DIR ]	drwxr-xr-x	2025-11-25 10:57
resolvconf	[ DIR ]	drwxr-xr-x	2020-08-24 23:48
rsyslog.d	[ DIR ]	drwxr-xr-x	2021-01-22 12:26
security	[ DIR ]	drwxr-xr-x	2017-06-20 11:40
selinux	[ DIR ]	drwxr-xr-x	2017-06-20 11:40
sensors.d	[ DIR ]	drwxr-xr-x	2020-08-24 23:50
sgml	[ DIR ]	drwxr-xr-x	2018-02-15 10:51
skel	[ DIR ]	drwxr-xr-x	2017-06-20 11:40
smartmontools	[ DIR ]	drwxr-xr-x	2018-02-14 11:37
snmp	[ DIR ]	drwxr-xr-x	2025-06-12 10:31
snmp-mibs-downloader	[ DIR ]	drwxr-xr-x	2021-02-09 18:05
ssh	[ DIR ]	drwxr-xr-x	2023-04-11 14:10
ssl	[ DIR ]	drwxr-xr-x	2024-03-12 14:15
sudoers.d	[ DIR ]	drwxr-xr-x	2023-04-01 11:07
sysctl.d	[ DIR ]	drwxr-xr-x	2024-03-12 22:00
systemd	[ DIR ]	drwxr-xr-x	2024-03-12 22:01
terminfo	[ DIR ]	drwxr-xr-x	2018-03-13 16:32
tmpfiles.d	[ DIR ]	drwxr-xr-x	2017-06-04 22:58
udev	[ DIR ]	drwxr-xr-x	2024-03-12 22:01
ufw	[ DIR ]	drwxr-xr-x	2023-04-11 14:21
update-motd.d	[ DIR ]	drwxr-xr-x	2020-08-24 23:41
vim	[ DIR ]	drwxr-xr-x	2024-03-12 22:01
xdg	[ DIR ]	drwxr-xr-x	2020-08-24 23:44
xml	[ DIR ]	drwxr-xr-x	2018-02-15 10:51
.pwd.lock	0 B	-rw-------	2017-06-20 11:40
adduser.conf	2.91 KB	-rw-r--r--	2017-06-20 11:40
aliases	198 B	-rw-r--r--	2023-03-10 12:04
aliases.db	12 KB	-rw-r--r--	2023-03-10 12:04
anacrontab	401 B	-rw-r--r--	2017-05-29 18:36
backup-manager.conf	19.43 KB	-rw-------	2022-11-18 15:34
backup-manager.conf.fad	19.4 KB	-rw-------	2020-11-17 09:59
backup-manager.conf.save	12 KB	-rw-------	2021-02-22 12:50
backup-manager.conf.save.1	19.42 KB	-rw-------	2021-02-22 12:50
bash.bashrc	1.82 KB	-rw-r--r--	2017-05-15 21:45
bindresvport.blacklist	367 B	-rw-r--r--	2017-04-09 23:28
ca-certificates.conf	8.39 KB	-rw-r--r--	2020-08-24 23:43
ca-certificates.conf.dpkg-old	7.26 KB	-rw-r--r--	2017-06-20 12:02
cronjob.php	0 B	-rw-r--r--	2021-08-06 16:29
crontab	788 B	-rw-r--r--	2022-09-29 09:03
debconf.conf	2.9 KB	-rw-r--r--	2017-05-21 19:08
debian_version	5 B	-rw-r--r--	2020-07-10 23:05
deluser.conf	604 B	-rw-r--r--	2016-06-26 22:00
drirc	4.37 KB	-rw-r--r--	2017-04-25 23:28
email-addresses	312 B	-rw-r--r--	2018-02-10 09:26
environment	0 B	-rw-r--r--	2020-08-24 23:46
fstab	99 B	-rw-r--r--	2020-08-24 23:41
ftpallow	130 B	-rw-r--r--	2016-12-08 13:28
ftpusers	177 B	-rw-r--r--	2016-12-08 13:28
gai.conf	2.52 KB	-rw-r--r--	2016-08-02 04:01
group	966 B	-rw-r--r--	2025-11-03 09:48
group-	940 B	-rw-------	2025-07-14 12:21
gshadow	801 B	-rw-r-----	2025-11-03 09:48
gshadow-	779 B	-rw-------	2025-07-14 12:21
host.conf	9 B	-rw-r--r--	2006-08-07 19:14
hostname	19 B	-rw-r--r--	2020-08-24 23:46
hosts	259 B	-rw-r--r--	2020-09-01 16:43
hosts.allow	411 B	-rw-r--r--	2018-02-14 11:37
hosts.deny	711 B	-rw-r--r--	2018-02-14 11:37
inetd.conf	1.03 KB	-rw-r--r--	2020-08-24 23:55
inputrc	1.71 KB	-rw-r--r--	2017-05-15 22:00
insserv.conf	859 B	-rw-r--r--	2016-07-13 12:40
iptables.custom.rulesnano	562 B	-rw-r--r--	2022-07-22 15:22
issue	26 B	-rw-r--r--	2017-04-04 18:00
issue.net	19 B	-rw-r--r--	2017-04-04 18:00
ld.so.cache	40.29 KB	-rw-r--r--	2025-11-03 08:37
ld.so.conf	34 B	-rw-r--r--	2017-04-09 23:28
libaudit.conf	191 B	-rw-r--r--	2017-04-12 18:17
locale.alias	2.92 KB	-rw-r--r--	2017-06-15 21:17
locale.gen	81 B	-rw-r--r--	2020-08-24 23:46
localtime	2.9 KB	-rw-r--r--	2022-06-15 14:00
login.defs	10.23 KB	-rw-r--r--	2017-05-17 13:59
logrotate.conf	599 B	-rw-r--r--	2015-05-06 00:18
machine-id	33 B	-r--r--r--	2017-06-20 11:40
magic	111 B	-rw-r--r--	2017-09-01 21:23
magic.mime	111 B	-rw-r--r--	2017-09-01 21:23
mailcap	9.04 KB	-rw-r--r--	2025-06-04 09:25
mailcap.order	449 B	-rw-r--r--	2016-05-01 13:20
mailname	19 B	-rw-r--r--	2020-08-24 23:46
manpath.config	5.05 KB	-rw-r--r--	2016-12-13 14:10
memcached.conf	1.39 KB	-rw-r--r--	2020-08-24 23:52
mime.types	23.73 KB	-rw-r--r--	2016-05-01 13:20
mke2fs.conf	973 B	-rw-r--r--	2017-02-01 01:54
modules	195 B	-rw-r--r--	2017-06-20 11:41
motd	1.03 KB	-rw-r--r--	2020-08-24 23:46
mtab	0 B	-r--r--r--	2025-12-15 23:47
my.cnf	1.74 KB	-rw-r--r--	2024-10-04 07:29
nanorc	8.56 KB	-rw-r--r--	2017-01-11 03:10
netconfig	767 B	-rw-r--r--	2018-08-31 21:56
networks	60 B	-rw-r--r--	2017-06-20 11:41
nsswitch.conf	497 B	-rw-r--r--	2017-06-15 21:17
ntp.conf	2.02 KB	-rw-r--r--	2018-02-15 12:45
os-release	261 B	-rwxrwxrwx	2020-07-10 23:05
pam.conf	552 B	-rw-r--r--	2017-05-27 17:44
papersize	3 B	-rw-r--r--	2020-08-24 23:50
passwd	2.29 KB	-rw-r--r--	2025-11-03 09:48
passwd-	2.25 KB	-rw-------	2025-07-14 12:21
profile	767 B	-rw-r--r--	2016-03-04 12:00
protocols	2.86 KB	-rw-r--r--	2016-12-26 02:56
quotagrpadmins	220 B	-rw-r--r--	2018-02-24 07:55
quotatab	526 B	-rw-r--r--	2018-02-01 12:55
resolv.conf	100 B	-rw-r--r--	2020-08-24 23:46
rkhunter.conf	44.31 KB	-rw-r--r--	2017-07-12 05:07
rmt	268 B	-rwxr-xr-x	2016-10-30 07:35
rpc	887 B	-rw-r--r--	2016-12-26 02:56
rsyslog.conf	1.92 KB	-rw-r--r--	2017-01-18 23:14
securetty	4.04 KB	-rw-r--r--	2021-03-17 10:27
sensors3.conf	10.13 KB	-rw-r--r--	2017-04-05 22:07
services	18.73 KB	-rw-r--r--	2016-12-26 02:56
shadow	1.76 KB	-rw-r-----	2025-11-03 09:49
shadow-	1.63 KB	-rw-------	2025-07-14 12:21
shells	73 B	-rw-r--r--	2017-06-20 11:40
smartd.conf	6.89 KB	-rw-r--r--	2016-07-30 19:10
staff-group-for-usr-local	771 B	-rw-r--r--	2012-06-09 12:00
subgid	142 B	-rw-r--r--	2025-11-03 09:48
subgid-	120 B	-rw-------	2023-12-21 09:00
subuid	142 B	-rw-r--r--	2025-11-03 09:48
subuid-	120 B	-rw-------	2023-12-21 09:00
sudoers	669 B	-r--r-----	2017-06-05 14:22
sysctl.conf	61 B	-rw-r--r--	2020-08-24 23:46
timezone	13 B	-rw-r--r--	2024-03-12 22:00
ucf.conf	1.23 KB	-rw-r--r--	2016-03-16 21:58
warnquota.conf	314 B	-rw-r--r--	2018-02-01 12:55
wgetrc	4.83 KB	-rw-r--r--	2017-03-18 15:12

Rename

#
# /etc/login.defs - Configuration control definitions for the login package.
#
# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
# If unspecified, some arbitrary (and possibly incorrect) value will
# be assumed.  All other items are optional - if not specified then
# the described action or option will be inhibited.
#
# Comment lines (lines beginning with "#") and blank lines are ignored.
#
# Modified for Linux.  --marekm

# REQUIRED for useradd/userdel/usermod
#   Directory where mailboxes reside, _or_ name of file, relative to the
#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
#   MAIL_DIR takes precedence.
#
#   Essentially:
#      - MAIL_DIR defines the location of users mail spool files
#        (for mbox use) by appending the username to MAIL_DIR as defined
#        below.
#      - MAIL_FILE defines the location of the users mail spool files as the
#        fully-qualified filename obtained by prepending the user home
#        directory before $MAIL_FILE
#
# NOTE: This is no more used for setting up users MAIL environment variable
#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
#       job of the pam_mail PAM modules
#       See default PAM configuration files provided for
#       login, su, etc.
#
# This is a temporary situation: setting these variables will soon
# move to /etc/default/useradd and the variables will then be
# no more supported
MAIL_DIR        /var/mail
#MAIL_FILE      .mail

#
# Enable logging and display of /var/log/faillog login failure info.
# This option conflicts with the pam_tally PAM module.
#
FAILLOG_ENAB		yes

#
# Enable display of unknown usernames when login failures are recorded.
#
# WARNING: Unknown usernames may become world readable. 
# See #290803 and #298773 for details about how this could become a security
# concern
LOG_UNKFAIL_ENAB	no

#
# Enable logging of successful logins
#
LOG_OK_LOGINS		no

#
# Enable "syslog" logging of su activity - in addition to sulog file logging.
# SYSLOG_SG_ENAB does the same for newgrp and sg.
#
SYSLOG_SU_ENAB		yes
SYSLOG_SG_ENAB		yes

#
# If defined, all su activity is logged to this file.
#
#SULOG_FILE	/var/log/sulog

#
# If defined, file which maps tty line to TERM environment parameter.
# Each line of the file is in a format something like "vt100  tty01".
#
#TTYTYPE_FILE	/etc/ttytype

#
# If defined, login failures will be logged here in a utmp format
# last, when invoked as lastb, will read /var/log/btmp, so...
#
FTMP_FILE	/var/log/btmp

#
# If defined, the command name to display when running "su -".  For
# example, if this is defined as "su" then a "ps" will display the
# command is "-su".  If not defined, then "ps" would display the
# name of the shell actually being run, e.g. something like "-sh".
#
SU_NAME		su

#
# If defined, file which inhibits all the usual chatter during the login
# sequence.  If a full pathname, then hushed mode will be enabled if the
# user's name or shell are found in the file.  If not a full pathname, then
# hushed mode will be enabled if the file exists in the user's home directory.
#
HUSHLOGIN_FILE	.hushlogin
#HUSHLOGIN_FILE	/etc/hushlogins

#
# *REQUIRED*  The default PATH settings, for superuser and normal users.
#
# (they are minimal, add the rest in the shell startup files)
ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games

#
# Terminal permissions
#
#	TTYGROUP	Login tty will be assigned this group ownership.
#	TTYPERM		Login tty will be set to this permission.
#
# If you have a "write" program which is "setgid" to a special group
# which owns the terminals, define TTYGROUP to the group number and
# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
# TTYPERM to either 622 or 600.
#
# In Debian /usr/bin/bsd-write or similar programs are setgid tty
# However, the default and recommended value for TTYPERM is still 0600
# to not allow anyone to write to anyone else console or terminal

# Users can still allow other people to write them by issuing 
# the "mesg y" command.

TTYGROUP	tty
TTYPERM		0600

#
# Login configuration initializations:
#
#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
#	UMASK		Default "umask" value.
#
# The ERASECHAR and KILLCHAR are used only on System V machines.
# 
# UMASK is the default umask value for pam_umask and is used by
# useradd and newusers to set the mode of the new home directories.
# 022 is the "historical" value in Debian for UMASK
# 027, or even 077, could be considered better for privacy
# There is no One True Answer here : each sysadmin must make up his/her
# mind.
#
# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
# for private user groups, i. e. the uid is the same as gid, and username is
# the same as the primary group name: for these, the user permissions will be
# used as group permissions, e. g. 022 will become 002.
#
# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
#
ERASECHAR	0177
KILLCHAR	025
UMASK		022

#
# Password aging controls:
#
#	PASS_MAX_DAYS	Maximum number of days a password may be used.
#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
#	PASS_WARN_AGE	Number of days warning given before a password expires.
#
PASS_MAX_DAYS	99999
PASS_MIN_DAYS	0
PASS_WARN_AGE	7

#
# Min/max values for automatic uid selection in useradd
#
UID_MIN			 1000
UID_MAX			60000
# System accounts
#SYS_UID_MIN		  100
#SYS_UID_MAX		  999

#
# Min/max values for automatic gid selection in groupadd
#
GID_MIN			 1000
GID_MAX			60000
# System accounts
#SYS_GID_MIN		  100
#SYS_GID_MAX		  999

#
# Max number of login retries if password is bad. This will most likely be
# overriden by PAM, since the default pam_unix module has it's own built
# in of 3 retries. However, this is a safe fallback in case you are using
# an authentication module that does not enforce PAM_MAXTRIES.
#
LOGIN_RETRIES		5

#
# Max time in seconds for login
#
LOGIN_TIMEOUT		60

#
# Which fields may be changed by regular users using chfn - use
# any combination of letters "frwh" (full name, room number, work
# phone, home phone).  If not defined, no changes are allowed.
# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
# 
CHFN_RESTRICT		rwh

#
# Should login be allowed if we can't cd to the home directory?
# Default in no.
#
DEFAULT_HOME	yes

#
# If defined, this command is run when removing a user.
# It should remove any at/cron/print jobs etc. owned by
# the user to be removed (passed as the first argument).
#
#USERDEL_CMD	/usr/sbin/userdel_local

#
# If set to yes, userdel will remove the user's group if it contains no
# more members, and useradd will create by default a group with the name
# of the user.
#
# Other former uses of this variable such as setting the umask when
# user==primary group are not used in PAM environments, such as Debian
#
USERGROUPS_ENAB yes

#
# Instead of the real user shell, the program specified by this parameter
# will be launched, although its visible name (argv[0]) will be the shell's.
# The program may do whatever it wants (logging, additional authentification,
# banner, ...) before running the actual shell.
#
# FAKE_SHELL /bin/fakeshell

#
# If defined, either full pathname of a file containing device names or
# a ":" delimited list of device names.  Root logins will be allowed only
# upon these devices.
#
# This variable is used by login and su.
#
#CONSOLE	/etc/consoles
#CONSOLE	console:tty01:tty02:tty03:tty04

#
# List of groups to add to the user's supplementary group set
# when logging in on the console (as determined by the CONSOLE
# setting).  Default is none.
#
# Use with caution - it is possible for users to gain permanent
# access to these groups, even when not logged in on the console.
# How to do it is left as an exercise for the reader...
#
# This variable is used by login and su.
#
#CONSOLE_GROUPS		floppy:audio:cdrom

#
# If set to "yes", new passwords will be encrypted using the MD5-based
# algorithm compatible with the one used by recent releases of FreeBSD.
# It supports passwords of unlimited length and longer salt strings.
# Set to "no" if you need to copy encrypted passwords to other systems
# which don't understand the new algorithm.  Default is "no".
#
# This variable is deprecated. You should use ENCRYPT_METHOD.
#
#MD5_CRYPT_ENAB	no

#
# If set to MD5 , MD5-based algorithm will be used for encrypting password
# If set to SHA256, SHA256-based algorithm will be used for encrypting password
# If set to SHA512, SHA512-based algorithm will be used for encrypting password
# If set to DES, DES-based algorithm will be used for encrypting password (default)
# Overrides the MD5_CRYPT_ENAB option
#
# Note: It is recommended to use a value consistent with
# the PAM modules configuration.
#
ENCRYPT_METHOD SHA512

#
# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
#
# Define the number of SHA rounds.
# With a lot of rounds, it is more difficult to brute forcing the password.
# But note also that it more CPU resources will be needed to authenticate
# users.
#
# If not specified, the libc will choose the default number of rounds (5000).
# The values must be inside the 1000-999999999 range.
# If only one of the MIN or MAX values is set, then this value will be used.
# If MIN > MAX, the highest value will be used.
#
# SHA_CRYPT_MIN_ROUNDS 5000
# SHA_CRYPT_MAX_ROUNDS 5000

################# OBSOLETED BY PAM ##############
#						#
# These options are now handled by PAM. Please	#
# edit the appropriate file in /etc/pam.d/ to	#
# enable the equivelants of them.
#
###############

#MOTD_FILE
#DIALUPS_CHECK_ENAB
#LASTLOG_ENAB
#MAIL_CHECK_ENAB
#OBSCURE_CHECKS_ENAB
#PORTTIME_CHECKS_ENAB
#SU_WHEEL_ONLY
#CRACKLIB_DICTPATH
#PASS_CHANGE_TRIES
#PASS_ALWAYS_WARN
#ENVIRON_FILE
#NOLOGINS_FILE
#ISSUE_FILE
#PASS_MIN_LEN
#PASS_MAX_LEN
#ULIMIT
#ENV_HZ
#CHFN_AUTH
#CHSH_AUTH
#FAIL_DELAY

################# OBSOLETED #######################
#						  #
# These options are no more handled by shadow.    #
#                                                 #
# Shadow utilities will display a warning if they #
# still appear.                                   #
#                                                 #
###################################################

# CLOSE_SESSIONS
# LOGIN_STRING
# NO_PASSWORD_CONSOLE
# QMAIL_DIR